Bios Utility; Boot Sequence; Enable Disk-To-Disk Recovery; Password - Acer Aspire 5755G User Manual

41

BIOS utility

The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run it.
To activate the BIOS utility, press < > during the POST; while the notebook PC
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
from the categories listed at the top of the screen.

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select from the categories listed at the top of the screen. Find
at the bottom of the screen and use the and keys to set this
value to .

Password

To set a password on boot, activate the BIOS utility, then select from
the categories listed at the top of the screen. Find and use
the and keys to enable this feature.