A Board Pwb Removal; Service Position; Side Control Module Removal - Sony FD Trinitron KV-28LS35B Service Manual

2-4. A Board PWB Removal [ Step 1 ]
Remove the screw securing the PWB to the main bracket.

2-6. Service Position

Place the A Board PWB in the position indicated to carry out
servicing.
Screw.
13
2-5. A Board PWB Removal [ Step 2 ]
Release the 5 securing clips located at the side and front of the
chassis and slide the PWB clear of the bracket.

2-7. Side Control Module Removal

Screws
Remove the two screws fixing the user control module to the
side of the set. The control module can then be removed by
sliding it towards the rear of the set allowing access to the
H2 Board.
Clip.