Subscribe to Our Youtube Channel
Summary of Contents for Cricket AutoMop CKTA24
- Page 1 Operating instructions (ENG) MODELS: CKTA24 10067000 CKTA24H 10067020 CKTA24P 10067030 CKTA24D 10067040 Read these instructions before using the machine. 86377800-C 12/14/13...
-
Page 2: Overview
Machine Data Label Overview The Cricket automop is a hard floor cleaning machine intended for commercial use. This appliance applies a cleaning solution to the floor and then pumps the soiled water back into the recovery bucket. Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. -
Page 3: Table Of Contents
Suggested Spare Parts..... 54 Serial Numbers ......55 8.637-780.0 Cricket Automop... -
Page 4: How To Use This Manual
KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. NOTE: The manual part number is located on the lower left corner of the front cover. 8.637-780.0 Cricket Automop... -
Page 5: Safety
This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes. Maintenance and repairs must be done by qualified personnel. READ AND SAVE THESE INSTRUCTIONS 8.637-780.0 Cricket Automop... -
Page 6: Safety
Cette machine est destinée à un usage commercial. Elle est recommandée davantage pour les domaines hôtelier, scolaire, hospitalier, industriel ou pour les bureaux, les chaînes de magasin, que pour un usage domestique normal. L'entretien et les réparations de la machine doivent être effectuées par un personnel qualifié. CONSERVER CES INSTRUCTIONS 8.637-780.0 Cricket Automop... -
Page 7: Hazard Intensity Level
In Flammable or Explosive areas. In areas with possible falling objects. WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use only manufacturer approved replacement parts. 8.637-780.0 Cricket Automop... - Page 8 LORS DE L'ENTRETIEN DE LA MACHINE: Éviter les parties amovibles. Ne pas porter de vêtements amples, tels que des vestes, des chemises ou des vêtements avec manches lors de l'utilisation de la machine. Utiliser les pièces détachées homologuées. 8.637-780.0 Cricket Automop...
-
Page 9: Safety Labels
EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ REMARQUE: Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment, les étiquettes deviennent illisibles, contactez votre représentant autorisé pour un remplacement rapide. WARNING LABEL P/N 86335010 8.637-780.0 Cricket Automop... -
Page 10: Operations
• Soaps • Vinegar Non-Compatible • Aldehydes • Aromatics Hydrocarbons • SP Butyls • Carbon Tetrachloride • Chlorinated Hydrocarbons • Lysol* • Methyl Ethel Ketone (MEK) • Perchorethylene (perc) • Phenolics • Trichlorethylene • D-Limonene *Registered Trademark 8.637-780.0 Cricket Automop... -
Page 11: Technical Specifications
Cet appareil n'est pas destiné à être utilisé par des gens (notamment des enfants) dont les capacités physiques, sensorielles ou mentales sont réduites, ou qui manquent d'expérience ou de connaissance, sauf s'ils ont été formés et encadrés pour l'utilisation de cet appareil par une personne responsable de leur sécurité. 8.637-780.0 Cricket Automop... -
Page 12: How This Machine Works
The Solution System consists recovery bucket. of the solution tank, the solution valve and the scrub pad. Solution flows from the solution tank through the manually operated solution valve and onto the scrub pad to clean the floor 8.637-780.0 Cricket Automop... -
Page 13: Pre-Run Inspection
If the 3M Easy Trap Strip material is taken from the bulk roll, be sure to use only 5 segments of material for each application. • Fold/wrap material over front edge of pad and hook material on the 5 plastic flippers to hold material in place. 8.637-780.0 Cricket Automop... -
Page 14: Cleaning
Automop 30-50 feet to minimize solution under the deck. 6. Raise the deck and wipe up remaining solution. If necessary, empty recovery bucket by lifting it from the Automop and properly disposing of recovered solution. Solution Control Knob Top View 8.637-780.0 Cricket Automop... - Page 15 Notes 8.637-780.0 Cricket Automop...
-
Page 16: Maintenance
Clean outside of all tanks and check for damage Check all gaskets for wear and leakage Replace 3M Easy Trap Strip (Recommended) Check scrub pad for wear Check for damaged or worn wheels Clean squeegee blade and check wear Clean wheels and castors 8.637-780.0 Cricket Automop... -
Page 17: Pad Installation
Maintenance Pad Installation Line up notches in pad with both ends of the squeegee and press firmly into place on all five plastic flippers. 8.637-780.0 Cricket Automop... -
Page 18: Squeegee Installation
3. Remove squeegee blade from deck housing, starting from the left side. Rotate the squeegee blade to a new edge position or replace as required. Each blade has four new edge positions. 4. Install squeegee blade onto deck housing by pushing blade onto retention features. 5. Install retention strap and hitch pin. 8.637-780.0 Cricket Automop... -
Page 19: Troubleshooting
Tighten clamps/Ensure hose seated Loose Hose properly Clean Squeegee and Scrub Pad. Squeegee Leaving Streaks Debris in Squeegee Pre-sweep Area to be Cleaned. Attach New 3M Easy Trap Strip. Damaged or Worn Squeegee Rotate or Replace Squeegee Blade Blade. 8.637-780.0 Cricket Automop... - Page 20 Notes: 8.637-780.0 Cricket Automop...
-
Page 21: Options Installation
Options Installation OPTIONS INSTALLATION 8.637-780.0 Cricket Automop... -
Page 22: Front Bucket Bracket
1. Remove the screws from both sides of inner walls and discard. 2. Install bushing and screw provided as shown on each inner wall. NOTE: The flange of the plastic bushing is positioned against the tank wall. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop... - Page 23 Options Installation 3. Slip each side of the bracket over bushings. 4. Install bucket. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop...
-
Page 24: Accessory Holder
Tools Needed: • Flathead Screwdriver or T25 Torx Driver 1. Place accessory holder on the bottom of the machine on either side and install with the two screws provided. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop... -
Page 25: Accessory Hook
1. Place flat mop on top of Accessory Holder. 2. Slide Accessory Hook down handle to location as shown. 3. Mark handle and drill pilot hole using #30 Drill Bit. 4. Attach hook with provided Screw. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop... -
Page 26: Wringer Bracket
Parts in Kit: Wringer Bracket 2x Spacer Tools Needed: • #3 Phillips Screwdriver 1. Remove screws from back of machine. 2. Add spacer and re-install each screw. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop... - Page 27 Options Installation 3. Slide wringer assembly over the spacers and push down firmly until it bottoms out. NOTE: For part numbers, see Models w/ Options section. 8.637-780.0 Cricket Automop...
- Page 28 Notes: 8.637-780.0 Cricket Automop...
-
Page 29: Parts
Parts PARTS 8.637-780.0 Cricket Automop... -
Page 30: Decals
Decals 8.637-780.0 Cricket Automop... - Page 31 Decals SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86004970 LABEL, WINDSOR LOGO DOMED 86376090 LABEL, CRICKET 8.637-780.0 Cricket Automop...
-
Page 32: Deck - Lift
Deck - Lift 8.637-780.0 Cricket Automop... - Page 33 SCREW, 1/4-20 X 3/4 CARRIAGE OPEN 86273810 SCREW, 1/4-20 X 1. HHCS SS 86270990 NUT, 10-32 HEX NYLOCK SS 86233390 CLAMP, 7/8 DIA "P~CUSHIONED 86010630 WASHER, 1/4 X .625 FLT SS 86271870 NUT, 1/4-20 HEX NYLCK THIN SS 8.637-780.0 Cricket Automop...
-
Page 34: Deck - Squeegee
Deck - Squeegee 8.637-780.0 Cricket Automop... - Page 35 SCREW, 5/16-18 X 1.75 SCHBTNHCS SS 86272670 PIN, CLEVIS 5/16 X 1.75 STL ZNPLT 86271840 NUT, 5/16-18 HEXTHIN NYLOCK SS 86222300 NUT, 5/16-18 HEXTHIN SS 86011020 WHEEL, 3” DIA. CUSHION RUBBER 86008660 COTTER, 5/16 RING 86001350 BUSHING, SPANNER .435 X 1.10 8.637-780.0 Cricket Automop...
-
Page 36: Handle And Bucket
Handle and Bucket 8.637-780.0 Cricket Automop... - Page 37 PART NO. DESCRIPTION NOTES FROM 86219690 KNOB, 1.5 OD X 5/16-18 86373110 HANDLE, BLACK, SCRUBBER 86374560 PIVOT, HANDLE 86373600 SCREW, 5/16-18 X 2 HHMS SS SCREW, 1/4-20 X .75 PHPNHMS STL BLK 86276100 ZNPLT 86375360 BUCKET, 4 GALLON 8.637-780.0 Cricket Automop...
-
Page 38: Recovery - Pump
Recovery - Pump TO DECK 8.637-780.0 Cricket Automop... - Page 39 SCREW, 10-32 X .75 TMS SS BLK SCREW, KA50 X 16 PT PHPNHTF SS 86327510 WN1412 86277640 SCREW, 1/4-20 X .75 PHTRHMS SS 86270990 NUT, 10-32 HEX NYLOCK SS 86233150 CLAMP, 3/8 WORM GEAR 86005810 NUT, 1/4-20 HEX NYLOCK SS 8.637-780.0 Cricket Automop...
-
Page 40: Recovery - Wheel & Pump Mounting
Recovery - Wheel & Pump Mounting RECOVERY PUMP 8.637-780.0 Cricket Automop... - Page 41 SCREW, 1/4-20 X 1 HHCS SS 86271840 NUT, 5/16-18 HEXTHIN NYLOCK SS 86222300 NUT, 5/16-18 HEXTHIN SS 86010670 WASHER, 5/16 X .75 X .04 FLT SS 86274880 SCREW, 1/4-20 X .875 HHCS STL GR5 ZNPLT 86010630 WASHER, 1/4 X .625 FLT SS 8.637-780.0 Cricket Automop...
-
Page 42: Solution
Solution 8.637-780.0 Cricket Automop... - Page 43 HOSE, 1/4ID X 14” CLR 86375870 NIPPLE, 1/2NPT X 2LG 86375630 BRKT, RECOVERY 86379340 STRAP, RETAINING 86373860 TANK, BLUE, CKTA24 86371410 SCREW, 10-32 X .75 TMS SS BLK 86358680 CAP, CLEAN WATER SCREW, KA50 X 16 PT PHPNHTF SS 86327510 WN1412...
-
Page 44: Wheels
Wheels 8.637-780.0 Cricket Automop... - Page 45 WHEEL, 5D X 1 X .51D GRY 86233410 CLAMP, 3/4 DIA CUSHION .406 DIA 86228910 BUSHING, .377 X .502 X 1.25 FLG BRZ 86006580 SCREW, 1/4-20 X .58 PHPNHMS SS NP 86005630 NUT, 3/8-16 HEXTHIN NYLOCK SS 8.637-780.0 Cricket Automop...
- Page 46 Notes: 8.637-780.0 Cricket Automop...
-
Page 47: Models With Options
Models with Options MODELS WITH OPTIONS 8.637-780.0 Cricket Automop... - Page 48 1.006-702.0 8.637-780.0 Cricket Automop...
- Page 49 THROUGH 7 86375670 ASSY, UTILITY TRAY 86375400 HOOK, ACCESSORY 86006500 SCREW, 8-15 X .5 SLTDHWHSMS TYPEA SS 86379460 KIT, ACC HOLDER 86374380 ACCESSORY HOLDER 73031130 SCREW 6X25 -10.9-R2R (IN6RD) 86006580 SCREW 1/4-20 X 1/2 PPHMS SS DL 8.637-780.0 Cricket Automop...
- Page 50 1.006-703.0 8.637-780.0 Cricket Automop...
- Page 51 INCLUDES 2 86379390 SPACER, .225X.375X.187 NYL BLK 86375400 HOOK, ACCESSORY 86006500 SCREW, 8-15 X .5 SLTDHWHSMS TYPEA SS 86379460 KIT, ACC HOLDER 86374380 ACCESSORY HOLDER 73031130 SCREW 6X25 -10.9-R2R (IN6RD) 86006580 SCREW 1/4-20 X 1/2 PPHMS SS DL 8.637-780.0 Cricket Automop...
- Page 52 1-006-704-0 8.637-780.0 Cricket Automop...
- Page 53 INCLUDES 7 86379390 SPACER, .225X.375X.187 NYL BLK 86375400 HOOK, ACCESSORY 86006500 SCREW, 8-15 X .5 SLTDHWHSMS TYPEA SS 86379460 KIT, ACC HOLDER 86374380 ACCESSORY HOLDER 73031130 SCREW 6X25 -10.9-R2R (IN6RD) 86006580 SCREW 1/4-20 X 1/2 PPHMS SS DL 8.637-780.0 Cricket Automop...
-
Page 54: Suggested Spare Parts
86374400 GRATE, SUCTION 86375660 CHECK VALVE 86375580 SHEET, CHECK VALVE 86219690 KNOB, 1.5 OD X 5/16-18 86375650 PIN, HITCH 3/32 X 2.31 SS 86379440 PAD, AUTOMOP, WHITE, PKG OF 5 86260690 HOSE ASM, FCT ADPTR X 60" 8.637-780.0 Cricket Automop... -
Page 55: Serial Numbers
Serial Numbers REF. MODEL: SERIAL # 8.637-780.0 Cricket Automop...
Need help?
Do you have a question about the AutoMop CKTA24 and is the answer not in the manual?
Questions and answers