1. Manuals
  2. Brands
  3. JMV Manuals
  4. Security System
  5. Video Surveillance System
  6. User manual

JMV Video Surveillance System User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
JMV Video Surveillance

User Manual

Shenzhen Jim Video Technology Co., Ltd.
All right reserved
July 9th,2009
Ver：01.01.04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Video Surveillance System and is the answer not in the manual?

Questions and answers

Summary of Contents for JMV Video Surveillance System

  • Page 1: User Manual

    JMV Video Surveillance User Manual Shenzhen Jim Video Technology Co., Ltd. All right reserved July 9th,2009 Ver：01.01.04...
  • Page 2 Note Thank you for buying our product. Before using this surveillance system, please read the user manual carefully to familiar with their functions. Otherwise, we will not responsible for any consequence. This User Manual will tell you the installation, operation, setting and networking of Jimvise Surveillance system in detail.
  • Page 3 Features（H.264 Compression） Compression：H.264/MPEG 4； Display resolution：1024×768、1280×1024、16:9 widescreen、16:10 widescreen； Preview resolution(adjustable) ：704×576（PAL） ，740×480（NTSC） ； 352×288（PAL） ，370×240（NTSC） ； Video resolution：704×576（PAL） ， 740×480（NTSC） ； 352×288（PAL） ，370×240（NTSC） ； One PC can install multiple cards and have up to 12 channels full D1 or 48 channels full CIF Support one to 36 picture display in one screen, full screen display, auto flip Display/Record/Playback multi-channels in one screen;...
  • Page 4 User can set the system shutdown and restart time arbitrarily The surveillance system can be set to automatically start each time windows starts-up and shutdown when power off. When power on, the system will restart and recover video automatically. Reliable hardware and stable software Low hardware requirements, 48 channel’s recording occupy only 75% CPU System can effectively prevent system brush caused by repeated operation...

  • Page 5: Table Of Contents

    PART TWO SOFTWARE INTRODUCTION..................9   2.1 Enter Program.............................. 9  2.2 Software Main Interface Introduction......................10  2.2.1 JMV iSee Integrated Monitoring System Main Interface ............... 10  2.2.2 Main Interface Button Function Introduction ................. 11  2.3 Software Setting ............................15  2.3.1 Basic Setting ........................... 16 ...

  • Page 6: Chapter 1 Software Installation

    CHAPTER 1 SOFTWARE INSTALLATION 1.1 System Requirements 1.1.1 Hardware Requirements Intel G31/G35 chipsets，2 or more PCI-EXPRESS slots Motherboard Intel Core E4300 （Core(TM)2 E5200 is recommended） Memory 512M（Recommended dual memory） Display card Integrated graphics card Network 10/100M 1024*768，1280*1024，support widescreen Resolution 1.1.2 Software Requirements Operation system：Windows 2000/Windows XP/Windows Vista 1、Recommended operation system: Microsoft Windows XP Professional sp3 2、Install DirectX 9.0 or above...
  • Page 7 2) Click“OK” ，then according to the installation guide, click“Next”until finish 3) If the system is not installed video playback software, please install the “video decoder ” 4) When you install the “JMV iSee Integrated Surveillance system”,(fig 2)Click “ Continue Anyway” ，then according to the installation guide, click“Next”until finish Fig 2 5) “JMV iSee integrated surveillance system”...

  • Page 8: Software Uninstallation

    Fig 3 1.3 Software Uninstallation 1） Mode 1： Click Start > Procedures-> iSee ->Uninstallation, Uninstall the software will delete the related documents, but keep DVR video files and folders. 2）Mode 2：Open “control panel”,then double-click “ ” to find “iSee DVR”,click “cancel”on the lower right corner, then according to the installation guide, click“Next”until finish...

  • Page 9: Part Two Software Introduction

    After installing the “JMV iSee Integrated Surveillance System”, double-click the icon “ ” on Windows desktop or click Start->Program->Jim Video Tech, Ltd-> iSee-> iSee to open "JMV iSee Integrated Surveillance System” preview screen, no need to input password. Fig 4 All buttons are locked after entering the main interface of “JMV iSee Integrated Surveillance...

  • Page 10: Software Main Interface Introduction

    2.2 Software Main Interface Introduction 2.2.1 JMV iSee Integrated Monitoring System Main Interface Before running “JMV iSee Integrated Monitoring System”, make sure your computer display 32-bit true color resolution, resolution ration 1024*768 or 1280*1024. (It is recommended to use 1280*1024 for a display larger than 17” as it will be larger and clearer...

  • Page 11: Main Interface Button Function Introduction

    Fig 7 2.2.2 Main Interface Button Function Introduction 1) Multi-picture Switching Display in 1 picture /4 picture /16 picture /25 picture and full screen 2) Rearrangement Button When there is no image display in sequential windows, this button can help rearrange all windows with images in order.
  • Page 12 Click to enter program configuration screen. Note: only administrator and senior user can use this function. 7) Help Button Click, “JMV iSee Integrated Monitoring System” User Manual, 8) Lock Button Click, it will lock current screen, and show the unlock window as fig 8: Fig 8 When locked, there is no response to click any button.
  • Page 13 Click, JMV iSee Integrated Monitoring System will minimize in taskbar, and it will be back to Windows screen. 10) Hardware Device List Fig 9 Show current PCI-EXPRESS video capture card device status in host computer. 11) Open Button Choose one camera in device list, and click “...
  • Page 14 Choose one camera in device list, and click “ ” to stop current video recording. 14) Close Button Choose one camera in device list, and click “ ” to stop current video recording. 15) Snapshot Button Choose one camera or click one monitoring screen in device list, and click“ ”...

  • Page 15: Software Setting

    ：P/T/Z preplace position call button; click, and input the the preplace position number to call P/T/Z preplace position. 20) Exit Button Click “ ” to exit JMV iSee Integrated Monitoring System” 2.3 Software Setting Click “ ” to enter the program setting screen, see fig 10:...

  • Page 16: Basic Setting

    Fig. 10 Click the list in the right to choose channel and do the settings for each channel. 2.3.1 Basic Setting Click “Basic” icon to enter into basic parameters setting, seen in fig. 11:...
  • Page 17 Connection way: Display whether it is the local device Camera description: Input a text description for the selected camera Activate this device when JMV iSee system is open: Check the box, this video channel will open automatically when “JMV iSee Integrated Monitoring System” start. Otherwise not Start recording when the device is open: Check the box;...

  • Page 18: Record Setting

    Check the box, the video support remote monitor Otherwise not Apply to all： Check the box, the setting of other all video channels will be the same as the current video channel Otherwise not Use Default Click it will return to factory setting After you change the setting, it is necessary to click “Apply”...

  • Page 19: Video & Audio Setting

    Scheduled Record: There are three scheduled record modes to choose: ①Once: Define the recording time for any recording file ②A week: User can set the record time (from Monday to Sunday) ③24/7: The camera will record all time Use Default Click it will return to factory setting After you change the setting, it is necessary to click “Apply”...

  • Page 20: Ptz Setting

    → Video Compression: H.264/MPEG4 → Optimized Encoder: there is three choices-super high quality, high quality and high speed. → Super high quality—the image is best with video not compressed, the CPU occupancy a bit higher, and the recording file disk is not limited. It is mainly used in such fields as Bank, Financials and Government etc.
  • Page 21 Fig 14 1. PTZ Setting Start PTZ: Check the box to start PTZ and do setting for PTZ protocol, COM, port, Baud Rate and PTZ address if the device has PTZ function Otherwise not PTZ Protocol: Decode protocol for decoder. This software has installed main internet protocols, such as, PELCO-D，PELCO-P，SUMSANG etc.

  • Page 22: Alarm Setting

    position name”, and click “Add” to complete PTZ preplace position setting. Input the PTZ number in the text of “call PTZ preplace position”, and click “call”. After the setting changed, click “Apply” to save. 2.3.5 Alarm Setting Click “Alarm Setting”icon to enter the alarm setting screen, see fig 15 Fig 15 If you need to connect the monitoring system with the alarm system, check “Enable alarm”...

  • Page 23: Color Setting

    the devices, it is necessary to set different addresses for all devices that has connected with the monitoring system. Port rate: the default speed rate for digital transfer is 2400 when the monitoring system connects with the alarm system. All alarm devices can set the port rate, 2400, 4800, 9600 and 19200 for choices. Alarm handling: the monitoring system can react when alarming, such as, recording, snapshot, call preplace position and reminding sound etc.

  • Page 24: Motion Detection

    video. Use default Click it will return to factory setting. After you change the setting, it is necessary to click “Apply” button to save. 2.3.7 Motion Detection Click “Motion Detection” icon to enter the motion detection setting screen, see fig 17: Fig 17 Enable video motion detection Check the box to enable video motion detection for the selected video...

  • Page 25: Privacy Masking

    Enable E-mail sending Check the box to enable E-mail sending. After motion detection recording finished, it will send the recording to the preset E-mail address. Otherwise not Use default Click it will return to factory setting. After you change the setting, it is necessary to click “Apply” button to save. 2.3.8 Privacy masking Click “Privacy Masking”...

  • Page 26: Display Setting

    Any change to this function, it is a must to restart the software. Pages Cycling Interval Click “ ”(page cycling button) to set Interval time for pages cycling, the default time is 10 seconds. Default Display Video Channels The number of display screens when start “JMV iSee Integrated Surveillance System” OSD Setting...

  • Page 27: Storage Setting

    □Time Display: Check the box to display time and date in the screen Otherwise, it will not display time and date in the screen □ Display Device Name Check display preset device name Otherwise, it will not display the preset device name □Animation Display When Alarming: Check the box, the screen will become full screen from a small screen and flickering when alarming Otherwise, no response in the screen when alarming...

  • Page 28: System Setting

    Fig. 20 Disk Volume Show current number of disks, total volume and free space etc on the host computer. To keep the system stable, it is better not set disk C as storage disk. The default storage disk is disk D, and you can set other disks as the storage disk manually.

  • Page 29: Network Setting

    Fig. 21 □ Auto running the software when power on: Check the box, the “JMV iSee Integrated Surveillance System” will start automatically when computer power on. Otherwise not □Auto shutdown when software closed: Check the box, the computer will shutdown automatically when “JMV iSee Integrated Surveillance System”...
  • Page 30 ① Register a domain name in JMV server, tie the domain name to DVR host, and realize remote monitor through IE browse. ② Apply an ID number, and realize remote monitor through this software. The following steps are introductions: 1) DDNS / Dynamic IP Setting a) Change server address The default server IP address of Shenzhen .
  • Page 31 Fig. 23 ② click “Device” on the right equipment list， this option enables user to add device from other LAN or Internet. Click“Add Remote” ，and then choose Internet, input the ID number applied just now. Save the password, and click “OK”.
  • Page 32 Fig. 24 ③ The internet equipment we applied(e.g. DVServer@2288) will be seen on the right of the main screen, click of “+”before device will pop out the possible DVR channels. If the user need remote monitor he/she can right click the channel and open it. Fig.
  • Page 33 Fig. 26 Install Activex control software according to the guide. After that, input the ID number applied, user name and password for connection, see fig 27: Fig. 27 Click “ ”to enable client’s remote Surveillance for the selected channel when it is connected to the server, see fig 32...
  • Page 34 Fig. 28 Note：Only senior user can change the configuration of this page. 2.3.10 User setting 3. Click “User” to open “User Setting”(fig 29)：...
  • Page 35 Fig. 29 If this is the first time for you to use our software please enter “Setting”, set operators and their permissions to prevent normal user login with administrators account, causing unnecessary losses. Administrators have the supreme authority to add, delete, manage the user etc. ”on the below of equipment list to add a new user: Click“...

  • Page 36: Chapter 3 Playback

    CHAPTER 3 PLAYBACK Click on ,to enter video playback,(Fig.30)： Fig.30 Video file display: the default is nine-picture display, the user can adjust for 16-picture display, 25-picture display or full screen. Single left-click any display window to have a full screen view on the current channel.
  • Page 37 right corner. Play Pause Stop Snapshot Backup Fast backward the image Fast forward the image Step backward by 10 seconds Step forward by 10 seconds...

  • Page 38: Chapter 4 Technical Parameters

    CHAPTER 4 TECHNICAL PARAMETERS Model Windows XP PRO (recommended) Multi-channel PAL/NTSC video input Support secondary display device 8/16 channel（open and closed optional）alarm input，can be extended to 32 channel 8/16 channel（open and closed optional）alarm output，can be extended to 32 channel Interface RJ-45 352*288dpi (PAL)、352*240dpi (NTSC) Resolution...
  • Page 39 background color Continuous record, scheduled record, alarm linkage record, detection record, hard Record Mode disk overwrite record, auto record when power on Video Quality Set the image quality to be best, better, normal, bad or worst Compression H.264 Video Medium Hard disk with capacity unlimited Retrieval and display according to the time;...
  • Page 40 control remote shutdown and restart the outlet server Multilevel password management to realize unattended operation: power off system shutdown can save all record files; restart and recover to record status when protection power on; auto restart when the system closed Seamless Replace video files with seamless connection technology, to ensure the video connection...

  • Page 41: Appendix I: The Recommendation For Dvr Card

    Appendix I: The Recommendation for DVR Card Jim Video Call Your Attention: Our strict test approves that Jim Video’s DVR Card work stably with recommended hardware. Jim Video advises you to select the recommended hardware, to eliminate system instability. Ⅰ. 4CH/8CH/12CH Full CIF Realtime Name Model Brand...

  • Page 42: Ⅲ. 16Ch/24Ch/32Ch/48Ch Full Cif Realtime

    Ⅲ. 16CH/24CH/32CH/48CH Full CIF Realtime Name Model Brand Remark Motherboard GA-G31-S3G/ GA-G31-S3L Gigabyte Core 2 E5200 or better Intel （including fan） Memory DDR2 1G Kingston Buy the hard disk Hard Disk 320G Seagate according to your requirement Power 350W GreatWall/HuntKey Power Rating Case Industrial 400L/450L...

  • Page 43: Software

    DVR software; please don't run other applications when DVR software running.) To insure the normal work of “JMV software” please install mainboard driver before the installation of video driver.
  • Page 44 Model Picture GA-G31-S3G GA-G31M-S2L...
  • Page 45 GA-G31MX-S2 GA-G31-S3L...
  • Page 46 SHENZHEN JIM VIDEO TECHNOLOGY CO.,LTD Add：RMB504,Techonology Innovation International,10 Block of Tech South RD,Nanshan, Shenzhen, Guangdong, China Website: www.JMV-tech.com TELL: +86-755-86377041 FAX: +86-755-86377040...

Table of Contents