Kenwood RXD-501 Service Manual page 7

2. Destination list of tuner
Desti- DS W
nation 3(83pin) 2(84pin) 1(85pin) (86pin)
K1 0 0
K2 0 0
K3 1 0
E1 0 0
E3 1 0
E1 0 1
RDS
E2 0 1
RDS
Q 0 1
3. Test mode
3-1 Test mode of the receiver
3-1-1 Setting of the test mode
While pressing the [INPUT] key or [Band] key, plug the
AC power cord into AC outlet.
3-1-2 Canceling of the test mode
Unplug the AC power cord.
3-1-3 Condition in test mode
POWER • • • • • • ON
SELECTOR • • • AUX (in case of [INPUT] key)
TUNER (in case of [BAND] key)
FL, LED • • • • • All the fluorescent display indicators
and LEDs light. (The all illuminated
state is cleared by pressing any main
unit key or remocon key.
EX. BASS • • • • • OFF
S.W. • • • • • • • • • OFF
3-1-4 Basic operation in test mode.
(1) The muting during mode selection is not controlled in
the test mode.
(2) The test mode is cancelled when the AC power is
turned OFF.
(3) The operation of the keys in the test mode, as follows.
3-1-5 The operation of the keys in the test mode.
(1) MODE / DEMO key
When this key is pressed in the test mode, all the flu-
orescent light off and normal display are indicated
cyclically.
CIRCUIT DESCRIPTION
Receiving frequency
Band
0 0 FM 87.5MHz~108.0MHz
AM 530kHz~1700kHz
0 1 FM 87.5MHz~108.0MHz
AM 530kHz~1610kHz
0 1 FM 87.5MHz~108.0MHz
MW 530kHz~1610kHz
SW 5.9MHz~17.9MHz
1 1 FM 87.5MHz~108.0MHz
AM 531kHz~1602kHz
1 1 FM 87.5MHz~108.0MHz
MW 531kHz~1602kHz
SW 5.9MHz~17.9MHz
0 1 FM 87.5MHz~108.0MHz
AM 531kHz~1602kHz
1 0 FM 87.5MHz~108.0MHz
MW 531kHz~1602kHz
LW 153kHz~279kHz
1 1 FML 65.0MHz~74.0MHz
FMH 87.5MHz~108.0MHz
MW 531kHz~1602kHz
LW 153kHz~279kHz
RXD-501/551/571/A5/701/751/771/A8
Channel
range space
100kHz
10kHz
100kHz
10kHz
100kHz
10kHz
5kHz
50kHz
9kHz
50kHz
9kHz
5kHz
50kHz
9kHz
50kHz
9kHz
9kHz
10kHz
50kHz
9kHz
9kHz
(2) DISC 1~3 keys
With the selector on AUX, when the DISC 1~3 keys
are operated, the 3D level settings can be made as
follows.
1 DISC 1 • • • • 3D ON level
2 DISC 2 • • • • 3D ON level
3 DISC 3 • • • • 3D ON level
(3) DISC SKIP key (S level display)
With the selector on TUNER, the fluorescent changes
cyclically as follows by pressing the [DISC SKIP] key.
1 ATT is switched OFF. "ATT OFF XX"
2 ATT is switched ON. "ATT ON XX"
3 ATT is switched OFF. Normal display
XX means A/D value (HEX) of S.
(4) CD STOP key
With the selector on TUNER, when the [CD STOP]
key operated, the preset memory can be changed as
10 steps.
î10 ì ì î20 ì ì î30 ì ì î40 ì ì î00 (ì ì )
(5) AUTO, TUNING UP/DOWN
With the selector on something other than TUNER,
the E.Q (Flat, Min, Max) settings can be made by
pressing the [AUTO] key and the tuning [UP] [DOWN]
keys.
[AUTO] key
TUNING [DOWN] key
TUNING [UP] key
PORT
IF RF
47
+10.7MHz 25kHz 0
+450kHz 10kHz 0
+10.7MHz 25kHz 1
+450kHz 10kHz 0
+10.7MHz 25kHz 1
+450kHz 10kHz 0
+450kHz 5kHz 0
+10.7MHz 25kHz 0
+450kHz 9kHz 0
+10.7MHz 25kHz 0
+450kHz 9kHz 0
+450kHz 5kHz 0
+10.7MHz 25kHz 0
+450kHz 9kHz 0
+10.7MHz 25kHz 0
+450kHz 9kHz 0
+450kHz 9kHz 0
+10.7MHz 5kHz 1
+10.7MHz 5kHz 0
+450kHz 9kHz 0
+450kHz 9kHz 0
-8 (Min)
0 (Center)
+8 (Max)
E.Q Flat
E.Q Min
E.Q Max
7