Onkyo TX-8050 Instruction Manual page 50

Firmware Update
6 Select the USB input source.
"Now Initializing" is displayed on the front display
and then the name of the USB device is displayed.
It takes 20 to 30 seconds to recognize the USB
device.
7
Press the [SETUP] button on the remote
controller.
Setup menu will be displayed on the front display.
The procedures thereafter can also be performed on
the receiver by using its [SETUP], arrow and
[ENTER] buttons.
8 Select "Update" and press [ENTER].
9 Select "Via USB" and press [ENTER].
Select "Update" and press [ENTER].
10
The update process will begin.
During the update process, you can still view the
update progress on the front display of the receiver.
Do not turn off the receiver and do not remove the
USB device during the update process.
11 The message "Completed!" appears on the
front display of the receiver, indicating that
the update has been completed.
12
Using [ON/STANDBY] on the front panel,
turn off the receiver and then remove the
USB device.
Do not use [] on the remote controller.
Congratulations! You now have the latest firmware
installed on your Onkyo receiver.
Troubleshooting
Case 1:
If "No Update" is displayed on the front display of the
receiver, it means that the firmware has already been
updated. You do not need to do anything further.
Case 2:
If an error occurs, "Error!! *-** No media" is displayed
on the front display of the receiver. (Alpha-numeric
characters on the front display are denoted by asterisks.)
Refer to the following table and take appropriate action.
50
En-
—Continued
■ Errors during an update via USB
Error Code
The USB device was not detected.
Make sure the USB flash memory or
USB cable is properly connected to
*-10, *-20
the USB port. If the USB storage
device has its own power supply, use it
to power the USB device.
The firmware file was not found in the
root folder of the USB device, or the
firmware file is for another model.
Retry and download the file on the
*-14
support page of the web site, following
the on-site instructions. If the error
persists, please contact Onkyo
Support and provide the error code.
Retry the update procedure from the
beginning. If the error persists, please
Others
contact Onkyo Support and provide
the error code.
Case 3:
If an error occurs during the update, disconnect then
reconnect the AC power cord and try again.
Case 4:
If an error occurs due to a wrong selection of input
sources, turn off and on the receiver. Then retry the
update.
ONKYO SOUND & VISION CORPORATION
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540,
JAPAN
The Americas
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600
Fax: 201-785-2650
Hours: M-F 9am-8pm/Sat-Sun 10am-4pm ET
<http://www.us.onkyo.com/>
Europe
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555
<http://www.eu.onkyo.com/>
China, Hong Kong
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain Plaza Tower 1, 88, Container
Port Road,
Kwai Chung, N.T., Hong Kong
Tel: 852-2429-3118 Fax: 852-2428-9039
<http://www.onkyochina.com/>
Asia, Oceania, Middle East, Africa
Please contact an ONKYO distributor referring to
Onkyo SUPPORT site.
<http://www.intl.onkyo.com/support/local_support/index.html>
Description