Related Manuals for RotaTrim PT Series
Summary of Contents for RotaTrim PT Series
- Page 1 P T SERIES POWERCUTTER PART 1 OPERATORS MANUAL ROTATRIM LTD 8 CAXTON PARK BEDFORD MK41 0TY UNITED KINGDOM Tel. 01234 224545 Fax. 01234 224550 DECEMBER 2005 Issue 5...
-
Page 2: Table Of Contents
CONTENTS UNPACKING PAGE 3 INSTALLATION PAGE 3 HOW TO USE YOUR POWERCUTTER PAGE 4 FAULTFINDING PAGE 5 ACCESSORIES PAGE 6 FITTING THE EXTENDED RULE PAGE 7... -
Page 3: Unpacking
UNPACKING Carefully unpack the Powercutter and check for visual signs of damage in transit. Included with your Powercutter should be the following; One mains connecting lead One footswitch complete with plug One instruction manual. One spare cutting wheel. One extended rule. Ensure that all the safety guards and protective covers are securely in place. -
Page 4: How To Use Your Powercutter
Depress the footswitch again to return the head to the right hand side. Two way cutting is possible under some circumstances. Please contact your dealer or ROTATRIM Ltd for advice. -
Page 5: Faultfinding
OVERLOAD If any attempt is made to cut materials in excess of the Powercutter's capacity, the motor will stall and the thermal trip will disconnect the supply. If this occurs, switch off the supply at the mains switch and remove the offending material from the machine. -
Page 6: Accessories
BASE EXTENSION It is possible to extend the depth of the baseboard in increments of 11 inches with a matching aluminium board. For details of any of these accessories please contact your dealer or ROTATRIM Ltd. P.T. SERIES RULE FITTING INSTRUCTIONS... -
Page 7: Fitting The Extended Rule
Remove the rule from the packing tube. Place the Powercutter on a firm surface with the cutting edge and guide bar away from you and the motor housing on the left hand side. Remove the two M4 screws and nuts from the baseboard at the left hand side of the cutting area and place the rule on top of the baseboard such that the holes drilled in the bottom of the rule are lined up with the screw holes in the base.
Need help?
Do you have a question about the PT Series and is the answer not in the manual?
Questions and answers