Advertisement
Check the following list to be sure a service call is really necessary.
If the water won't drain:
If the water temperature
is incorrect:
• Isthe hose kinkedor knotted?
• Is the WATER TEMP. SELECTION set correctly?
• ts the drain outlet clogged?
• Are the hoses connected to the correct faucets (hot to hot,
cold to cold)?
If the washer
does
not fill:
• Are the hot and cold faucets turned on?
• ts the electricat cord plugged in correctly?
• Is the water heater set correctly?
• Has a fuse blown or is the circuit breaker tripped?
If the washer
does not spin:
• Have the controlsbeen properlyset?
• is the lid closed?
• ts the PauseIndicatorlit? If so, touch the START/PAUSE Pad,
• Is the electrical cord pLuggedin correctly?
• Turn off, let stand for 30 minutes then restarL Motor thermal
protector may have engaged.
• Has a fuse blown or is the circuit breaker tripped?
• Are the hot and cold water faucets turned on?
If the washer is noisy:
• Are the hoses kinked or knotted?
• Is the washer level and firm to the floor?
• Are the hose filters clogged?
• is the load unbalanced? (Excessive vibration can occur when a
load becomes unbalanced.)
if water is leaking:
If a power
failure
occurs
during
a cycle:
• Are the hose connectionstight at the faucets?
• Restartand use SPIN ONLY to drain the washer. Then, start a
• Is the end of the drainhose correctlyinserted in and securedto
newcycle.
the drainfacility?
21
Advertisement
