POWER ON BOARD VEC280POB User's Manual & Warranty Information
  1. Manuals
  2. Brands
  3. POWER ON BOARD Manuals
  4. Power Tool
  5. VEC280POB
  6. User's manual & warranty information

POWER ON BOARD VEC280POB User's Manual & Warranty Information

Rechargeable inflator/spotlight high pressure/high volume inflator combo with 12 volt dc portable power supply
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Enlarged version
VEC280POB_Manual_071105
7/28/05
3. If you suspect a bulb is blown, check the bulb filament. If filament is coiled and
unbroken, the bulb is not blown. If filament is blown, replace bulb.
4. If you suspect the main fuse is blown, check it and, if necessary, replace with a
new 20 amp spade fuse.
SPECIFICATIONS
Spotlight:
12 volt H3, 25 watt bulb
Batteries:
Two maintenance-free, sealed lead acid,
6 volt, 4.5 Ah
AC Adapter:
1000mA, 12 volt high frequency charger
Operating Voltage:
12 volts DC
10:43 AM
Page 8
8
Rechargeable
Inflator/Spotlight
High Pressure/High Volume Inflator Combo
with 12 Volt DC Portable Power Supply
USER'S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
VEC280POB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VEC280POB and is the answer not in the manual?

Questions and answers

Summary of Contents for POWER ON BOARD VEC280POB

  • Page 1: Warranty Information

    Page 8 3. If you suspect a bulb is blown, check the bulb filament. If filament is coiled and VEC280POB unbroken, the bulb is not blown. If filament is blown, replace bulb. 4. If you suspect the main fuse is blown, check it and, if necessary, replace with a new 20 amp spade fuse.

  • Page 2: Important Safety Instructions

    WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Power On Board. Enter 7. DO NOT overinflate objects or exceed manufacturer’s recommendations for pressure on objects to “VEC280POB” as Model and “Rechargeable Inflator/Spotlight” as Product Type. All Vector products must be inflated.
  • Page 3 Specifications ..........8 INTRODUCTION Congratulations on purchasing the VEC280POB Power Board Rechargeable Inflator/ Spotlight .

  • Page 4: Ac And Dc Charging/Recharging

    The quartz halogen Spotlight is operated by the ON/OFF switch located on the The Rechargeable Inflator/Spotlight also comes with a 12 Volt DC charging control panel. adapter for recharging the unit from a 12 volt DC accessory outlet in a vehicle.

  • Page 5: Using The 12 Volt Dc Accessory Outlet

    VEC280POB_Manual_071105 7/28/05 10:43 AM Page 4 USING THE 2-LED AREA LIGHT Inflating Products Without a Valve Stem Using the Compressor Inflation of other items requires use of one of the adapters (nozzles). The 2-LED Area Light is operated by the LED Area Light ON/OFF Pushbutton located to the right of the Area Light on the front of 1.

  • Page 6: Care And Maintenance

    VEC280POB_Manual_071105 7/28/05 10:43 AM Page 6 Battery Replacement/Disposal 4. Slide the Air Compressor/OFF/Inflator Switch to INFLATOR (bottom position). It is recommended that the unit be returned to Customer Service for 5. When product is fully deflated, turn the Air Compressor/OFF/Inflator Switch to battery replacement.

Table of Contents