A/v cable with remote for your ipod, iphone, or ipad (4 pages)
Summary of Contents for iSimple TranzIt
Page 1
IS77 TranzIt Owner’s Manual AFTERMARKET FACTORY RADIO INTEGRATION connection for iPod, iPhone or iPad FOR YOUR iPod, iPhone or iPad MAKE THE CONNECTION audio/video output to your iPod to your iPhone “factory look” 3.5 mm dash panel to your iPad...
Page 3
This interface has a universal 3.5mm input that can be configured to accept an audio signal from any source. The TranzIt™ will route the audio from your device through your factory radio. If your audio source is an iPod, iPhone, or iPad featuring a docking connector, this interface will also provide battery charging when connected.
Page 4
Connects to Antenna Out * Fuse iPod, iPhone, or iPad iPod, iPhone, or iPad TranzIt (not included) Header Plug Audio Cable (5 ft.) Antenna In * B. Connecting a Source with a Headphone or Line Output Connection for iPod Connects to...
Page 5
*A vehicle specific antenna adaptor may be required to make these connections The rocker switch supplied with the TranzIt will turn the device on and off. When the switch is in the on position, the TranzIt will interrupt the incoming antenna signal to deliver the cleanest signal possible from your device through your FM radio.
TranzIt™ interface. Local radio station is interfering with the Change the frequency setting on the side auxiliary input device of the TranzIt™ to the other position, and use the new frequency to access the audio source Low audio...
® product are guaranteed for a period of 1 year as follows: Within the first 12 months from date of purchase, subject to the conditions above, iSimple ® will repair or replace the product at our discretion, if it is defective in material or workmanship providing it is returned to an Authorized iSimple ’...
Need help?
Do you have a question about the TranzIt and is the answer not in the manual?
Questions and answers