Monster Power Reference PowerCenter HTS2600 Owner's Manual page 15

STEP 3 Low Current Audio Outlet (Switched) Hookup
NOTE
Because certain components don't need continuous power, or shouldn't be turned on continuously,
these outlets are "switched." This means the components plugged into these outlets won't receive power or shut
down unless your PowerCenter is turned on or off. You can plug any type of low current audio component
(e.g., portable cassette player) or video component (e.g., camcorder) into the pre-amp or tape outlets.
A) Attach a Monster Power
color-coded PowerCenter outlet.
B) PRE-AMP/PROCESSOR: Plug the processor's power cord into the HTS 2600's corresponding
PRE-AMP/PROCESSOR outlet.
C) TAPE: Plug your tape deck's power cord into the corresponding TAPE outlet.
GROUND
UNSWITCHED
Designed in U.S.A.
Manufactured
in China
9
ID label to each component's power cord before you plug it into the appropriate
®
UNSWITCHED UNSWITCHED SWITCHED
CABLE TV REMOTE
IN OUT AC IN 110V 0.3A
SATELLITE
IN OUT
TIMED
ANTENNA
IN OUT
DC IN 9~12V 300MA
IN OUT 1
OUT 2
PHONE
BREAKER 15A 1800W
PRESS TO RESET MAX TOTAL