monster tower K-Comp Owner's Manual

Tower speakers

K-Comp Tower Speakers

Installation Instructions

Monster Tower, Inc.

1205 Alpha Drive

Alpharetta, GA 30004

THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY

WITH YOUR NEW SPEAKERS, PLEASE CONTACT US. Our entire purpose as a company is to

offer great products at affordable prices that our customers love.

Please take a few minutes to read the installation instructions and become familiar with the

speaker and installation before beginning to ensure a high quality, trouble free installation and

use. If you have any questions during your installation give us a call at 877-77-Tower or e-mail

Support@MonsterTower.com

NOTES ON INSTALLING AND USING YOUR NEW SPEAKERS

For best performance, provide 100W-RMS at 4 Ohm to each speaker

Regularly check all hardware to make sure it is tight

Although the speakers are weather resistant and designed for outdoor use, do not spray

directly into the grill with high-pressure water

Handle the speakers with care as the enclosures can be damaged if dropped

You will need two sets of wires for each speaker, one for the speaker and one for the light.

We recommend 16 gauge 4 conductor wire

If you have any further questions about wiring not covered in this manual please consult

with a specialist in the area.

XTPKCOMP-V1-040607

and Owners Manual

Phone: 877-77-Tower or 770-410-3451

Fax: 877-232-6538 or 770-234-3833

1 of 4

www.MonsterTower.com

Support@MonsterTower.com

Table of Contents

Need help?

Do you have a question about the K-Comp and is the answer not in the manual?

Page 1 You will need two sets of wires for each speaker, one for the speaker and one for the light. We recommend 16 gauge 4 conductor wire If you have any further questions about wiring not covered in this manual please consult with a specialist in the area. 1 of 4 XTPKCOMP-V1-040607 Copyright 2002-2007, Monster Tower, Inc.
Page 2 K-Comp Speaker Parts List and Assembly Diagrams Item Description Tower Bracket Collar Insert NL-4 Connector Enclosures Speakers Assembly Instructions STEP 1: Attach the Collar Bracket (Item 1) to the tower using the Collar Inserts (Item 2) that matches your size tower. Tighten to 20 ft-lbs. Speakers should only be placed hanging down from the tower.
Page 3 Any modifications or improper use, not approved in writing by Monster Tower, shall void this warranty. Monster Tower is not responsible for personal injury or damage to the boat caused by the use of this product. Monster Tower’s obligation under this warranty shall not include any transportation charges or costs of installation or any liability for direct, indirect or consequential damages resulting from delay or improper installation.
Page 4 For learning more about tower audio, we highly encourage you to visit the “Boats and Accessories” discussion boards at www.Wakeboarder.com and www.WakeWorld.com. We also support a website at www.diyTower.com that has a wealth of information on tower audio. 4 of 4 XTPKCOMP-V1-040607 Copyright 2002-2007, Monster Tower, Inc.