Rear Panel; Frequency Chart; Antenna; Power - Ranger RCI-6900F HP Manual

The channel display indicates the current selected channel.

2.1.2 REAR PANEL

Figure 2-2 represents the location of the following connections:

1. ANTENNA

This jack accepts 50 ohms coaxial cable with a PL-259 type plug.

2. POWER

This connector accepts 13.8V DC power cable with built-in fuse. The power cord provided with the
radio has a black and red wire. The black goes to negative and the red goes to positive.
3. CW. KEY
This is used for Morse Code operation. To operate this mode, connect a CW key to this jack, and place
the MODE switch in the CW position.
4. EXT. SP.
This jack accepts 4 to 8 ohms, 4 watts external speaker. When the external speaker is connected to this
jack, the built-in speaker will be disabled.

2.1.3 FREQUENCY CHART

CHANNEL 1 (MHz)
1 28.245
2 28.255
3 28.265
4 28.285
5 28.295
Figure 2-2 Rear Panel
FR. POOL
2 (MHz) 3 (MHz)
28.695 29.145
28.705 29.155
28.715 29.165
28.735 29.185
28.745 29.195
- 5 -
4 (MHz) 5 (MHz)
28.315 28.765
28.325 28.775
28.335 28.785
28.355 28.805
28.365 28.815
6 (MHz)
29.215
29.225
29.235
29.255
29.265