Nuvo NV-MPS4 User Manual page 19

Mac Music Port Client
If you would like to access your NuVo system and sources from a Mac computer
you will not use the Music Port Client stand-alone application. This application is
for Windows only. However The Music Port Client is available to be viewed in any
Internet browser on your Mac computer.
To do this you must know the IP address of the Music Port Server, and both the
server and the Mac computer must be on the same network. Your installer should
have provided you with the IP address for this product. If not, you may find the IP
address through a Control Pad connected to the system, by following the steps
below:
a- Select the Music Port Server as your music source from the Control Pad.
b- Select Menu. Scroll down using the down arrow on the Control Pad and
highlight Source Options. Select OK. Scroll down and select Source Info. Select OK.
c- Select IP address and press OK. Write down the number shown, including the
periods.
Once you have the IP address for the Music Port Server, open your preferred
Internet browser on your Mac computer. Enter the IP address in the browser and
the Music Port Client will load. Once complete you will have access to your NuVo
system and full control of the Music Port Server (Fig. 10). You may want to
bookmark this page for future use.
19