MWTC-REC6/UWTC-REC6
4.3 Configuration Software
The configuration software that is included with model REC6-PC
Setup/Programming Cable allows you to set the transceiver to receive wireless
signals from one transmitting device.
This cable is only used during setup and scaling and should be removed before
placing your transceiver into operation.
The transceiver configuration software is imbedded into Omega's universal
wireless software known as TC-CENTRAL. To open and run the configuration
program for your transceiver, follow the steps shown below.
3
Fig 4-2. Setup/Programming Cable Connection
All other functions and menu features included in the TC-
CENTRAL software are not used with your model transceiver
and will not function.
Fig 4-3. TC-CENTRAL Tools Menu Screen
SETUP/PROGRAMMING CABLE
REC6-PC (SOLD SEPERATELY)
NOTE: