Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
1. Assemble mounting plate (4) and pump housing (5) to gearmotor (3)
with with three #10-32 x 1
screw (2).
2. Slide white plastic washer (8) onto motor shaft. Press roller bracket
assembly (9) onto the motor shaft with the four self-locking teeth
toward the gearmotor. (As shown in the view above.)
3. Insert tubing (6) into pump. housing (5) inlet and work tube into
roller race as you rotate the roller bracket assembly. See details on
page 5.
4. Assemble pump cover (10) to pump housing. (5) with four #8-32 x
long screws (11).
ASSEMBLY INSTRUCTIONS
⁄
" long screws and one #8-32 x
1
4
4
⁄
" long
7
8
5
⁄
"
8
5
Advertisement
Table of Contents
