Advertisement
Before starting:
Your machine is tested and regulated in factory, however it is advised
to carry out the following controls before starting :
- electric connections correctly carried out
- installation carried out according to our
recommendations
- correct connection of arrival and exit water pipes
according to the written indications
(For more details on the rules of establishments refer to the
document: Of INSTALLATION AND MAINTENANCE)
- no foreign things on the machine or fixed on the gilds of
the radiator
After starting:
is regular; if high vibrations occur, stop the Heat pump and call your
fitter.
Careful :
The first pressure on the key ON/OFF gives the authorization of
starting the Heat pump; the latter will start within a variable time:
shortest within 1 second and longest within 4 minutes.
From its starting the heat pump heats or cools the swimming pool
water, and will automatically stop when the required temperature has
been reached; don't stop its operation unnecessarily.
If you have to stop the Heat pump operation (for example to pass
from the heating mode to the cooling mode), you will observe that the
Heat pump will start again after 4 minutes.
Instructions
5
Ensure that operation
www.pac-direct.com
Advertisement
