Advertisement
Advertisement
Table of Contents
Related Manuals for Sinotec MD-001
Summary of Contents for Sinotec MD-001
- Page 1 MD-001 DVD MINI COMPONENT SYSTEM USER MANUAL...
-
Page 2: Foreword
FOREWORD TROUBLE SHOOTING For your convenience, we have listed some methods to solve common problems you may encounter when using this system. If the problem is not solved please contact the nearest Thanks service center. Dear Customer, May we take this opportunity to thank you for purchasing this unit. We strongly Fault type Possible Cause Possible Solution... -
Page 3: Table Of Contents
SPECIFICATION CONTENT FOREWORD.......................1 CAUTIONS......................2 LIST OF MAIN PARTS..................2 DVCD Disc type SVCD PANELS......................3 CD-R REMOTE CONTROL..................4 MPEG4 CONNECT TO THE TV-SET................5 CONNECT TO THE AMPLIFIER..............6 SYSTEM CONNECTION..................7 Video format BASIC OPERATIONS..................8-14 MENU SETUP.....................15-19 RADIO OPERATION..................20 MPEG1, MPEG2, STEREO Audio format SPECIFICATION....................21 TROUBLE SHOOTING...................22 NTSC, PAL, AUTO... -
Page 4: Panels
RADIO OPERATION PANELS 1. Enter FM Function In the turn-on or playing status, press the FM button on the remote control to enter FM mode. 2. Select Bands 1) Directly input frequency: press the T/F button on the remote control, then input the frequency that you want. -
Page 5: Remote Control
MENU SETUP REMOTE CONTROL NOTE: Preference Setup Page 1. Turn on the player, insert the batteries into the remote control, and direct the remote control at the remote sensor on the front panel. 2. The distance of remote control should not exceed 7 metres, or else, it will be invalid. 3. - Page 6 CONNECT TO AMPLIFIER MENU SETUP Digital audio output setting 4.General Setup Connect coaxial output of the player to the corresponding inputs of the amplifier. When a disc is in play or stop mode, press the SETUP button on the remote control to open the DVD MENUsetup.
-
Page 7: Connect To The Tv-Set
CONNECT TO THE TV-SET MENU SETUP If your TV-set has an AV input, use the AV cable to connect the player to the TV-set. 3. Audio Setup Page Afterwards make sure the connection is right; by selecting AV status for your TV-set. ANALOG AUDIO SETUP DIGITAL AUDIO SETUP EQUALIZER... -
Page 8: System Connection
MENU SETUP SYSTEM CONNECTION 2. Video Setup Page Before connection of acoustic equipment, pay attention to the picture below. Each connection must be safe and firm. Only connect the power cable after you have finished all the connections. VIDEO OUTPUT CVBS TV DISPLAY 16:9 TV TYPE... -
Page 9: Basic Operations
BASIC OPERATIONS MENU SETUP Preparation Press SETUP button on the remote control to open the menu setup function, the TV 1) Before turning on the unit, check that all the connections are correct and safely screen will display the figure below. Press Left/Right direction buttons to move the inserted the plug in the corresponding power socket. - Page 10 BASIC OPERATIONS BASIC OPERATIONS Repeat While in play mode , press the REPEAT button to set repeat mode. 1. For DVD, as you press the REPEAT button, the TV screen will displays: Chapter, It is possible to listen to the Audio and watch Video/JPG files using the USB Title, All.
- Page 11 BASIC OPERATIONS BASIC OPERATIONS MPEG4/JPEG playback Menu While playing a VCD, press the MENU button, PBC current state view mode will be 1. Put a MPEG4/JPEG-disc in the slot, and close the disc tray. opened/close. Note: 1. While playing a DVD, press the MENU button to go into the Root menu status. 2.
- Page 12 BASIC OPERATIONS BASIC OPERATIONS Mp3 disc play function 1. If the player is in the PBC ON status, while playing the programmed songs, this operation will result in the PBC turning off. 1. Press the OPEN/CLOSE button on the front panel or the remote control to open the disc 2.
Need help?
Do you have a question about the MD-001 and is the answer not in the manual?
Questions and answers
Why is my music system not switching on but stays on standby mode?
The Sinotec MD-001 music system may not be switching on and staying in standby mode due to the following reasons:
1. Standby Mode Activation – The system enters standby mode when the STANDBY button on the remote control or front panel is pressed. Pressing it again should turn the unit on.
2. Remote Control Issues – If the remote control sensor is blocked or there is interference from high-frequency signals, the remote may not function properly. Ensure there are no obstructions and minimize interference from other electronic devices.
3. USB Extension Cable Length – If using a USB extension cable longer than 0.5 meters, the system may have difficulty reading media files, potentially causing delays in operation.
4. Media Device Read Time – Depending on the amount of data and media speed, the system may take up to 60 seconds to read the contents of a media device. If the system appears unresponsive, wait for it to complete the reading process.
If the issue persists, check the power supply and connections to ensure proper functionality.
This answer is automatically generated