Draper RHL125 Instructions

Halogen lamps

HALOGEN LAMPS

STOCK No.55947

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE

THE SAFE AND EFFECTIVE USE OF THIS TOOL.

Removable battery pack (built-in 6V 4A sealed lead-acid battery).

ON/OFF locking trigger switch prevents battery run down when not in use.

Charge in vehicle with car charger or at home with AC adaptor (both included).

Easy to replace halogen bulb.

We Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England.

Declare under our sole responsibility that the product:

Stock Nos:- 55947, 55948, 55949

Description:- Rechargeable halogen lamps

To which this declaration relates is in conformity with the following directive(s) 73/23/EEC &

89/336/EEC with reference to EN60598-1:1993, EN60598-2-7:1989, EN55014:1993,

EN61000-3-2:1995, EN61000-3-3:1995, BSEN60742:1996.

JOHN DRAPER

Managing Director

55948

55949

• INSTRUCTIONS •

FEATURES

DECLARATION OF CONFORMITY

Part Nos:- RHL125, RHL150, RHL185

PART No.RHL125

10/2001

RHL150

RHL185

Table of Contents

Need help?

Do you have a question about the RHL125 and is the answer not in the manual?

Page 1 Charge in vehicle with car charger or at home with AC adaptor (both included). Easy to replace halogen bulb. DECLARATION OF CONFORMITY We Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 55947, 55948, 55949...
Page 2 CHARGING To charge the battery pack, it must first be removed from the torch. To release the battery pack, squeeze the grips located on either side of the battery casing and gently pull the battery pack from the housing. WITH A.C. ADAPTOR: Plug the battery charger unit into a 13amp, three pin socket and the other end into the charging stand jack socket.
Page 3 TO REPLACE H3 6V 25W HALOGEN BULB 1. Release the battery pack. 2. Remove the cover plate from back of the spotlight. 3. Remove the wire spring and pull out the old bulb. 4. Insert the new bulb and re-insert the wire spring. 5.
Page 4 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Rhl185Rhl150