8 ft / 2.44 m billiard table with dartboard and cue rack (13 pages)
Summary of Contents for EastPoint Springfield 32101
Page 1
ITEM# 1-1-32101 ZSA/229m _RaCCUF g_d CK sse_ www°eastpoi ntsports.com TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY...
Page 2
IMPORTANT - • Table components are stored in the bottom of the cabinet. • Remove carton containing lower aprons. • Replace carton top and turn table over. Note: Use at least 2 adults to pick up and flip table. • Remove lower carton.
Page 3
ease inspect your play, el Your Cabinet (Billiard table Playfield) is NOT replaceable. Any damage that exists to your playfield is not reparable under warranty. If your playfield is damaged, the entire game must be returned to the original place of purchase for an exchange.
Page 4
TOOLS ::::: • Electric Screwdriver or Power Driver Required CAUTION - DO NOT OVER TIGHTEN, OverTightening will result in irreparable damage to the product. If using, • 1 - Phillips Head Screwdriver please make sure that the tool is set to a very low torque (Standard Size) - Not Included to prevent damage to the product.
Page 7
Accessories Brush CueChalk 57" Pool Cue c---- Pool Balls Triangle 0000 0000 0000 0000...
Page 8
-iNSTRUCTiONS BEFORE BEFORE BUILDING- Please inspect your playfield and layout all your parts Your Cabinet (Billiard Table playfield) is NOTreplaceable. that existsto your is not Any damage play_etd reparable under If your the entire must be warranty. playfield is damaged, game to the returned...
Page 9
STEP3 ") "Q Repeat for all Step 1 Assembly Step 2 four legs. Assembly - AB Step 2 Assembly - AB Do not overtig hten screws. Back 4x12mmScrew(use 8 of 13) Step 1 Assembly Repeat for all Step 2 Assembly - CD four legs.
Page 10
"0 Repeat for all ConnectBoard fOUr corners. Apron Lower Side Lower End Apron 8xl9mm washer 8x38mmHexB01t "0 Repeat for all Step 5 Assembly four legs. Step 6 Assembly Do not overtig hten screws. ,'ll ," 8x19mm Washer 8x38mm Hex B01t Step 6 Assembly Using at least Main Frame...
Page 11
Step 8 Assembly ,'11 ," Q8x19mmWasher 8x38mm Hex Bolt ® 8ram HexNut Main Frame Step 7 Assembly "e Use the shims 1mm Shim as needed 2mmShim under legs to level the table. 3mmShim You will need a Step 9 Assembly level to do this.
Page 12
RACK- NST UCT ONS STEP A ") • "I Do not over Cue Rack- Left Side tighten screws. Cue Rack- Right Side Cue Rack- Middle Shelf 4x44.5mm FlatHead Screw (8 of 16) "e Cue Rack-Top Panel Cue Rack- Base Panel ®...
Page 13
ThisLimitedWarranty gives youspecific legalrights,but youmayalsohaveotherrightsthat varyfrom stateto state. Ifyouhaveanyquestions r egarding this Limited Warranty or theoperationofthe Product, youmaycallor write us. ALLWARRANTY CLAIMS MUST BEACCOMPANIED BY A COPY OFTHESALES R ECEIPT/PROOF OFPURCHASE. REPORT A NYDEFECTS TO: EASTPOINT 628 ROUTE 1O,SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747...
Page 14
Table Top - • It is OK to gently vacuum the felt side of the billiard table with any standard handheld vacuum brush attachment. EASTPOINT www.eastpoi ntsports.com 628 ROUTE 1O,SUITE #5 WHIPPANY, NEW JERSEY 07981 • 1-973-585-4747...
Need help?
Do you have a question about the Springfield 32101 and is the answer not in the manual?
Questions and answers