Using The Soap Dispenser; Hanging Your Soap Dispenser; Specifications - Brookstone Hands-Free Soap Dispenser Instruction Manual

using The soaP disPenser

1. Turn the ON/OFF VOLUME ADJUSTMENT
knob to the right to turn ON.
2. Turn the ON/OFF VOLUME ADJUSTMENT
knob either left (for less) or right (for more) to
adjust the volume of product you want dispensed.
3. Move your hand under the INFRARED
SENSOR to dispense product.
4. The LED POWER LIGHT on the front will
only illuminate when the unit is dispensing
product or if the battery power is low.
5. You may leave the unit turned on and
in standby mode.
5
629261_INS_InfraredSoapDispenser DocumentSize:5"Wx4.75"H
1,Blk

hanging Your soaP disPenser

You may place your Soap Dispenser on a clean, flat surface, or you
may hang it up. If you choose to hang the dispenser, you will need to install
the WALL BRACKET first.
1.
2.
3.
4.
5.
6.
7.
8.

sPecificaTions

Soap Reservoir Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 200ml
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x 1.5V AA Alkaline Batteries
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.75 w x 5.5" l x 8.25 h
Product Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14oz
Output:100% Prints:1/
Place the BRACKET on the wall where you would like the dispenser
to be hung.
Make marks with a pencil through the screw holes and onto the wall.
Remove the BRACKET and use an awl to start the holes for the screws.
Place the BRACKET back on the wall with the bracket holes over the
screw holes you started.
Using a screwdriver, secure the BRACKET to the wall with one of the
included screws.
Ensure the BRACKET is perfectly vertical by adjusting it before tightening
the screw completely.
Secure with second screw.
After installing batteries and filling the SOAP RESERVOIR, hang the
Soap Dispenser on the WALL BRACKET securely.
6