Mounting And Detaching The Lens; Setting The Focus Mode; Focus Mode Switch - Canon EF-S18 Instruction

o
Mounting and Detaching the Lens
:;"~'~'~:':"~"'.;:~-:'.:;:.::.::.:.;
..
,:.:
8
Setting the Focus Mode
'<"~~-:-":"::::"";':'~':~';:"'.x.:
AFI rMF
~
To shoot in autofocus (AF) mode, set the focus
mode switch to AF.
To use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
focusing ring.
o
*»
Do not touch the rotating parts of the lens while
autofocus is active.
*»
Do not adjust focus manually when the focus
mode switch is set to AF.
@
After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
@
If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
@
If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
@
If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the
0
index of the dust cap as shown
in the diagram, and turn clockwise. To remove
it, reverse the order.
See your camera's instructions for details on
mounting and detaching the lens.
ENG-4