Rear Vision Camera - Chevrolet Cruse 2014 Getting To Know Manual

Automobile
Hide thumbs Also See for Cruse 2014:
Table of Contents

Advertisement

ULTRASONIC REAR PARKING ASSIST
Detected objects are indicated by audible beeps when the vehicle is in Reverse. The
interval between beeps becomes shorter as the vehicle gets closer to an object. When the
distance is less than 12 in. (30cm), the beeps are continuous. The system operates only at
speeds less than 5 mph.
To turn the system Off or On, press the CONFIG button to access the Configure menu
and select Vehicle > Collision/Detection Systems > Park Assist.
When the system is On, a beep sounds when shifting into Reverse.
Note: The system may not be available if dirt, snow or ice builds up on the sensors. Keep the vehicle
clean for proper operation.

REAR VISION CAMERA

Rear Vision Camera
When the vehicle is in Reverse, a view of the area behind the vehicle appears on the
infotainment screen.
To turn the system Off or On, press the CONFIG button to access the Configure menu
and select Display > Rear Camera Options > Camera. A checkmark indicates the
system is On.
Note: The system may not display a clear image if dirt, snow or ice builds up on the camera lens.
Clean the camera, located above the license plate, with water and a soft cloth.
Rear Cross Traffic Alert
The Rear Cross Traffic Alert system warns of traffic coming from either direction — up to
66 feet (20m) from the left or right side of the vehicle — by displaying a visual alert on the
infotainment screen from the Rear Vision Camera and sounding three beeps.
F Optional equipment
16
F
F
See Driving and Operating in your Owner Manual.
See Driving and Operating in your Owner Manual.

Advertisement

Table of Contents
loading

Table of Contents