USB
Chipset:
-
6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
-
7 x USB 2.0/1.1 ports (3 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
3 x system fan headers
1 x front panel header
1 x front panel audio header
1 x USB 3.0/2.0 header
2 x USB 2.0/1.1 headers
1 x serial port header
1 x Clear CMOS jumper
1 x power button
1 x reset button
1 x Clear CMOS button
2 x BIOS switchs
2 x audio gain control switches
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x coaxial S/PDIF Out connector
1 x optical S/PDIF Out connector
1 x DisplayPort
1 x HDMI port
4 x USB 3.0/2.0 ports
3 x USB 2.0/1.1 ports
1 x RJ-45 port
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic
In, Line Out, Headphone)
I/O Controller
iTE
I/O Controller Chip
®
Hardware
System voltage detection
Monitor
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating warning
CPU/System fan fail warning
CPU/System fan speed control
* W hether the fan speed control function is supported will depend on the cooler you
install.
- 11 -
Hardware Installation