Haier HWR05XCM User & Care Manual page 11

ELECTRICAL REQUIREMENTS cont.
• Electrical shock hazard
• P u l g into a mating, grounded 3 prong
outlet.
• o D not remove the ground prong from the
power supply cord.
TO TEST YOUR POWER SUPPLY CORD:
1. P u l g power supply cord into a mating, grounded 3 prong outlet.
(See Fig.5)
2. Press RESET (on some devices, a green light will turn on).
3. r P ess TEST (listen for click; Reset button will trip, and on some devices
a green light will turn off).
4. r P ess and release RESET (listen for click; Reset button will latch, and on
some devices, a green light will turn on). The power supply cord is ready
for operation.
NOTE:
• The RESET button must be pushed in completely for proper operation.
(See Fig.6)
• The power supply cord must be replaced if it fails to trip when the test
button is pressed or fails to reset.
• DO NOT turn the air conditioner on or off by unplugging the power
supply cord from the outlet. Always turn the air conditioner on or off at
the control panel or by using the remote control.
• A damaged power supply cord must be replaced with a new power
supply cord obtained from the product manufacturer and installed my
a qualified service professional. It cannot be purchased at a retail store
and must not be repaired by the user.
f I the power supply cord is damaged please call Haier Customer Service:
1-877-337-3639.
• The power supply cord contains no user-serviceable parts.
• Opening the tamper-resistant case voids all manufacturer warranties.
WARNING
• o D not use a plug adapter, extension cord,
surge protector, or multi-outlet adapter
• F
result in injury, fire, or electrical shock.
INSTALLATION REQUIREMENTS
l i a r u e to follow these instructions can
Fig. 5
Fig. 6
ENGLISH
PAGE 9