Fuel Tube Inspection; Fuel Filter And Fuel Tank Cleaning - Honda HHE31C Owner's Manual

SERVICING YOUR HONDA STICK EDGER

Fuel Tube Inspection

FUEL
RETURN
TUBE
(clear)
Check the fuel supply and return tubes, and
replace any tube that is damaged, cracked,
or leaking.
Refer to the Honda shop manual for tube
replacement instructions, or take the stick
edger to an authorized Honda servicing dealer.

Fuel Filter and Fuel Tank Cleaning

1. Remove the fuel tank cap, and empty the
fuel tank into an approved gasoline
container. Use a funnel to avoid
spilling gasoline.
26
FUEL
SUPPLY
TUBE
(black)
2. Pull the fuel filter out through the fuel filler
neck by hooking the black fuel supply tube
with a piece of wire, such as a partly
straightened paper clip.
3. Inspect the fuel filter. If the fuel filter is dirty,
remove it and wash it with nonflammable
solvent. Be careful to avoid damaging the
filter.
Replace the filter if it is damaged or
excessively dirty.
4. Rinse sediment from the fuel tank with
nonflammable solvent.
5. Insert the fuel filter in the fuel tank, and
install the fuel tank cap.
FUEL SUPPLY TUBE
(black)
FUEL
FILTER