Honda 2004 TSX Owner's Manual page 257

Main Menu Table of Contents
Cooling System
13. Remove the radiator cap. Pour
coolant into the radiator up to the
base of the filler neck and into the
reserve tank up to the MAX mark.
14. Start the engine and hold it at
1,500 rpm until the cooling fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.
15. Install the radiator cap, and
tighten it fully.
16. If necessary, fill the reserve tank
to the MAX mark. Install the
reserve tank cap.
254
Maintenance