Tire Labeling - Honda 2008 Accord Sedan Owner's Manual

Main Menu

Tire Labeling

The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Tire Labeling Example
(1)
(4)
(3) (2)
(1) Tire Size
(2) Tire Identification Number (TIN)
Maximum Tire Pressure
(3)
Maximum Tire Load
(4)
390
Table Of Contents
Tire Size
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
P225/50R17 93V
P Vehicle type (P indicates
passenger vehicle).
225 Tire width in millimeters.
50 Aspect ratio (the tire's section
height as a percentage of its
width).
R Tire construction code (R
(1)
indicates radial).
17 Rim diameter in inches.
2008 Accord Sedan
93 Load index (a numerical code
associated with the maximum
load the tire can carry).
V Speed symbol (an
alphabetical code indicating
the maximum speed rating).
Tire Identification Number (TIN)
The tire identification number (TIN)
is a group of numbers and letters
that look like the following example.
TIN is located on the sidewall of the
tire.
DOT B97R FW6X 2202
DOT This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.
B97R Manufacturer's
identification mark.