Main Menu
Table of Contents
Digital Clock, Center Table
Digital Clock
On models without navigation system
H
M
The digital clock displays the time
with the ignition switch in any
position.
To set the clock:
1.
Turn the ignition switch ON (II).
130
Instruments and Controls
2.
Press and hold the H button until
the hour advances to the desired
time.
3.
Press and hold the M button until
the numbers advance to the
desired time.
You can use R to quickly set the time
to the nearest hour. If the displayed
time is before the half hour, pressing
R sets the clock back to the previous
hour. If the displayed time is after
the half hour, pressing R sets the
R
clock forward to the beginning of the
next hour.
For example:
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
Center Table
To use the center table, pull up the
outside edge of the table until it
latches. To store it, pull the lever and
lower the table.