Honda 2003 TL Owner's Manual page 277

Main Menu
Table of Contents
Lights
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Remove the burned-out bulb by
pulling it straight out of the socket.
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
274
Maintenance
Replacing a Rear License Plate
Bulb
1. Use a small Phillips-head
screwdriver to remove the two
screws. Remove the lens from the
license plate assembly.
2. Remove the bulb by pulling it
straight out. Push the new bulb
into the socket.
3. Put the lens back in place and
tighten the two screws securely.