Sanyo PLC-XW57 Specification Sheet page 2

Light Weight and Compactness
The compact and lightweight body (330.0 (W) x 80.0 (H) x 237.0 (D) mm and 2.9 kg)
offers great portability. (not including protruding parts)
Bright Images Even In a Well-Lit Room
The PLC-XW57 use a 200-watt UHP lamp for outstanding brightness and well-
balanced color reproduction. The PLC-XW57 series provide 2,000 lumens
brightness.
High-Quality UXGA/WXGA Compressed Projection with DRIT
Digital Realized Interpolation Technology (DRIT) for supporting input signals with
resolutions from UXGA to VGA by compressing/decompressing signals.
Two D-sub Terminals
The PLC-XW57 has two D-Sub terminals
for computer input, one of which may be
changed to a monitor output terminal.
Power-Off and Go
No need to wait for the projector to cool down. You can disconnect the power cord
right after your presentation.
Wide-Range 1.2x Zoom Lens
This zoom lens lets you project a 100" image (measured diagonally) from as close as
3.5 meters from the screen, to as far away as 4.2 meters. That makes it a lot easier
to find suitable places to set the projector up.
Digital Keystone Correction
To compensate for keystone (trapezoidal) picture distortion, the PLC-XW57 provide
vertical keystone correction with a correction range up to ±20 degrees.
Note: On screen image size after correction
is smaller than that of original. Correction
range varies depending on operation settings
such as lens shift ratio, lens zoom magnifica-
tion and so on.
Digital Zooms Make Setting Up More Flexible
The PLC-XW57 feature a 1/2x to 16x digital zoom that lets you easily enlarge or
reduce the screen display size as desired.
Fan Control System Reduces Unwanted Noise
The intelligent Fan Operation Linear Control System reduces cooling fan noise
according to changes in temperature.
3D AUCC for High-Resolution Images
The 3D Automatic Uniformity Correction Control (AUCC) circuit ensures a uniform
projected image, balancing uneven color and brightness gradations for more natural
image displays.
Security Functions
The PIN code lock function prevents others from operating the projector without
inputting the correct PIN code. The key lock function, which is set from the
operation menu, locks the operation of the top control and remote control buttons.
Blackboard (Green color) Mode
This mode lets you use a blackboard as a projection screen*. It adjusts the colors to
make images look similar to those projection to an ordinary white screen.
* For blackboard of green color only.
Countdown/Immediate Projection Selectable
You can select either mode at start-up. Countdown mode ensures that the lamp has
reached sufficient brightness before projecting the image. Immediate mode lets you
project the image as soon as the power is turned on, even if the optimum level of
brightness has not been reached.
Other Features
• Freeze function • Customizable start-up logo • User logo function • No show
function • Presentation timer • Multilanguage menu display (16 languages)
http://www.sanyo-lcdp.com/english/
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
Specifications
Model name PLC-XW57
Panels 0.6-inch TFT p-Si x 3 with Micro Lens
No. of pixels 2,359,296 (1024 x 768 dots)
Projection lamp 200 W
Brightness (typical) 2000 lm
Uniformity 85 % (corner to center)
Projection lens F1.6 – 1.76, f= 22.3 – 26.8 mm
Screen size 40" – 300" 1.4 – 12.7 m (100" at 3.5 – 4.2 m)
Zoom / Focus 1.2 manual driven, U:D= 6:1
HDTV signals
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Color systems PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Video signal RCA x 1; Composite, D-sub 15pin for Component and S-video input
Video terminals RCA: Composite video, D-sub 15pin: Component video and S-video input*
Computer compatibility UXGA / WXGA / SXGA / XGA / SVGA / VGA / MAC analog
Computer terminals
D-sub 15pin for Input, D-Sub15pin for Input or Monitor out
RCA (L/R) for video input
Audio Mini-Jack (stereo) for computer input
Mini-Jack (stereo) for output (variable)
Communication terminals Service Port (RS-232C)
Presentation tools Freeze / Digital Zoom / No Show / etc.
Other features Progressive, 3-2 & 2-2 pull down, User logo
H sync: 100 kMz, V sync: 100 Hz,
Scanning frequency
Dot clock: 110 MHz
Sound output 1.0 W Mono
Voltage 100 V – 240 V AC (auto voltage)
Dimensions (W x H x D) 330.0 x 80.0 x 237.0 mm (not including protruding parts)
Weight 2.9 kg
* For use with optional cable POA-CA-COMPVGA
• Design of the product, specifications are subject to change without notice.
External dimensions
(unit: mm)
262.5
Air Intake Vent
85.0
330.0
92.0
10˚
80.0
42.6 330.0
97.9
29.4
50.0
5.9
85.0
Air Intake Vent 262.5
Approximate throw distance/ picture size
300"
(Inch Diagonal)
ZOOM(max.)
200"
250"
ZOOM(min.)
A 168"
(Center)
B
40" 100"
Screen Size (W x H) mm
4 : 3 aspect ratio
813 x 610 2032 x 1524
Zoom (min.) Tele 1.7 m 4.2 m
Zoom (max.) Wide 1.4 m 3.5 m
Approximate throw distances shown adove were calculated on lens design specifications.
Please note that up to 5% deviation may result due to lens variation.
All products manufactured by the Projector Integrated Business Unit of SANYO's
DI Company employ a quality management system that has undergone the
inspection and registration process of the ISO 9001:2000 international standard.
SANYO's DI Company has received ISO 14001 certification for
the environmental management system used in its factory.
4-M 4mm Diameter
Depth Max. 10mm
262.5
Air Exhaust 85.0
Vent
85.0
123.5
175.0 75.0
180.0
Air Intake Vent
10.6 m
7.1 m
5.3 m
150"
100" 3.5 m
125"
40" 1.4 m
83"
A : B = 6 : 1
150" 200" 300"
3048 x 2286 4064 x 3048 6095 x 4572
6.4 m 8.5 m 12.7 m
5.3 m 7.1 m 10.6 m
Pixelworks ICs are used in this projector
SANYO Electric Co., Ltd.
DI Company
©2008 SANYO Printed in Japan 2008.3 MA
SML113
55.0