Radio Shack Micro-43 Owner's Manual page 25

14-1182.fm Page 25 Thursday, January 27, 2000 8:26 AM
To prevent accidental erasure of a tape
recording, use a screwdriver to remove
one of the microcassette tape's erase-
protection tabs. This prevents from
REC
being pressed.
If you later decide to record on a tape side
after you have removed either erase-
protection tab, place a piece of strong
plastic tape over that erase-protection
hole. Be sure you cover only the hole
originally covered by the erase-protection
tab.
Caution: Removing the erase-protection
tabs does not prevent a bulk eraser from
erasing a microcassette tape.
25