PROEL Xeos User Manual page 2

speaker max rotation
NOTE: the drill drawing shown is for vertical mounting
NOTA: il disegno della foratura è per il montaggio verticale
WALL DRILLING - SNBK or SNWH optional accessory
FORATURA MURO - accessorio opzionale SNBK o SNWH
2
WALL DRILLING - FORATURA MURO
XE35T
170mm
[6.7"]
screw
Ø6mm
[Ø0.2"]
wires
Ø8mm
[Ø0.3"]
screw
Ø6mm
[Ø0.2"]
130mm
[5.1"]
Always check that the fixing plugs choosen are suitable to the type of wall
and that they can hold up the weight of the speaker safely.
Recommended screws for the fixing plugs are:
Ø 6mm [1/4"] for XE35T
Ø 8mm [5/16"] for XE55T
Ø 10mm [13/32"] for XE65T
Accertarsi sempre che i tasselli scelti siano adatti al tipo di parete e siano
in grado di sostenere il peso dell'altoparlante in sicurezza.
Le viti raccomandate per i tasselli sono:
Ø 6mm per XE35T
Ø 8mm per XE55T
Ø 10mm per XE65T
Questo accessorio può essere usato
solo per il modello XE55T.
This accessory can be used
only for XE55T model.
XE55T
speaker max rotation
192mm
[7.6"]
fix screw max
Ø10mm
[Ø0.4"]
wires max
Ø14mm
[Ø0.6"]
fix screw max
Ø10mm
[Ø0.4"]
182mm
[7.2"]
max horizontal aiming rotation is 90° left or right
max vertical aiming rotation is 25° down and 12° up
FIG. 1
XE65T
speaker max rotation
230mm
[9.1"]
fix screw max
Ø10mm
[Ø0.4"]
wires max
Ø14mm
[Ø0.6"]
fix screw max
Ø10mm
[Ø0.4"]
220mm
[8.7"]
XE55T
speaker max rotation
360mm
[14.2"]
screw
Ø6mm
[Ø0.2"]
screw
Ø6mm
[Ø0.2"]
182mm
[7.2"]