Table of Contents
Advertisement
Installation
It is recommended that assistance be available to safely install equipment in equipment racks.
1.
Begin assembly of the rack by attaching the rail supports (2 pcs.) to the base.
2.
Attach the side rails (2 pcs.) to the rail supports.
3.
Attach the top brace (1 pc.) to the top ends of the side rails.
4.
Check all of the nuts and bolts (14) for tightness before mounting components on the rack.
5.
Always place MOR-** on a stable level surface.
6.
For added stability attach the base plate of the MOR-** to the structure of the flooring (check local construction codes for compliance) with proper
mounting hardware (not provided).
Installation Procedure
MOR
Ph: 800-421-6511
www.picomacom.com
Series
7
Rev. 06/03
Advertisement
Table of Contents
