Table of Contents
Advertisement
１
5. Input and output signals
5-1. Input signal conditions
1) Genlock input (MULTI connector)
･ VBS
1.0 Vp-p ±3 dB or black burst/75 Ω or high (BNC)
･ HD/VD 2 to 5 Vp-p, negative (D-sub connector)
Note:
Genlock input and Sync output are selected by internal input/output switch.
2) External trigger input (MULTI connector)
Ext Trig Low 0 VDC, High 2 to 5 VDC
3) Serial data (REMOTE connector)
1.5 Vp-p ±3 dB/High (when connected to RC-Z3, JU-C20, JU-Z2)
RS-232C level (when connected to personal computer)
Note:
Set internal switches according to connected equipment.)
A level converter JU-C20 is required if controlling the camera from a personal computer via
RS-232C interface over a distance more than approx.15 meter.
5-2. Output signal ratings
1) Component video output (VIDEO, MULTI connector)
VBS 1.0 Vp-p/75 Ω
2) Y/C output (Y/C connector, MULTI connector)
Y: 1.0 Vp-p/75 Ω
C: NTSC 0.286 Vp-p (burst)/75 Ω
PAL 0.3 Vp-p (burst)/75 Ω
3) Component output (MULTI connector)
Y:
R-Y/B-Y:
4) RGB output (MULTI connector)
RGB:
Note: YC/VBS, component and RGB MULTI connector outputs are selected by menu.
5) Sync outputs (MULTI connector)
HD/VD: 2 Vp-p/75 Ω
Sync:
Note:
Genlock input and Sync output are selected by internal input/output switch.
6) Serial data output (REMOTE connector)
1.5 Vp-p/Low (when connected to RC-Z3, JU-C2-, JU-Z2)
RS-232C level (when connected to personal computer)
Note:
Set internal switches according to connected equipment.)
DWN
・ ・
DSGN
・ ・
CHKD
・ ・
APPD
・ ・
１
２
(sync 0.3 ±0.1 Vp-p, burst 0.3 ±0.1 Vp-p)
1.0 Vp-p/75Ω
0.7 Vp-p/75Ω
0.7 Vp-p/75Ω
2 Vp-p/75 Ω
HV-D27A/HV-D37A
Color Camera
Tentative
Specification
(7/17)
２
３
Hitachi Kokusai Electric Inc
Tokyo Japan
４
３
Ａ
Ｂ
Ｃ
Ｄ
Ｅ
Ｆ
Advertisement
Table of Contents
