Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Northern Industrial Tools 157830
Summary of Contents for Northern Industrial Tools 157830
- Page 1 1" IMPACT WRENCH KIT OWNER’S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 157830 Page: 1 of 8...
-
Page 2: General Safety Rules
For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire instruction sheets to become familiar with this product before using it. - Page 3 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure the trigger is off before connecting to the air supply. Carrying pneumatic tools with your finger on the trigger, or connecting pneumatic tools to the air supply with the trigger on, invites accidents.
- Page 4 2. When connecting to the air supply: Prior to each use, if an automatic oiler is not used, add two drops of air tool oil (not included) into the air inlet fitting of the tool. 3. Always disconnect the tool from its compressed air supply source, and squeeze the trigger to release all compressed air in the tool before performing any maintenance or service.
- Page 5 If the tool stalls while tightening, DO NOT raise the outlet pressure of the air compressor above 90 PSI. When the nut has been tightened, remove the tool and socket. Do not over-tighten. If available, check the recommended torque specifications for the nut. You should use a ...
- Page 6 Diagram Parts List MANUFACTURER’S LIMITED WARRANTY Page: 6 of 8...
- Page 7 The limited warranty set forth below is given by Northern Tool + Equipment Company Inc., (NTE) with respect to new merchandise purchased and used in the United States, its possessions and territories. NTE warrants this product against defects in material and workmanship for a period of 12 months parts/ 12 months labor commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship.
- Page 8 may also have other rights which vary from state to state. For questions about your warranty, please call 1-800-222-5381. WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Need help?
Do you have a question about the 157830 and is the answer not in the manual?
Questions and answers