Advertisement
Quick Links
Advertisement
Summary of Contents for Smarthome 1625 TempLinc
- Page 1 TempLinc™ X10/PLC compatible temperature sensor Model #1625 TempLinc...
-
Page 2: Key Features
• Small sized sensor • Includes new PowerLinc II Interface module with pass-through AC outlet • Compatible with Smarthome Live and Smarthome Action Compatibility with Third Party Home Automation Programs TempLinc uses the same translation table as the RCS family of powerline control- lable thermostats. -
Page 3: Installation
Parts included with TempLinc • The TempLinc sensor • PowerLinc II PowerLine Interface Module • PowerLinc II connecting cable • Double-sided foam tape and mounting screws Please note that this PowerLinc II interface is designed to only work with the TempLinc sensor. While it resembles our regular # 1132B PowerLinc II interface, the two are incompatible and not interchangeable. - Page 4 New Features in TempLincs with the PowerLinc II interface With the changeover to the new PowerLinc II interface, we have taken some time to implement some user-suggested improvements. Since most of the brains of the TempLinc system are in the PowerLinc II interface, any TempLinc sensor and cable will have these improvements when used with the PowerLinc II interface.
- Page 5 • Indigo Software for Mac (version 1.3.0 and above) • Zeus Home Control (version 3.1 and above) Please note: there are no guarantees that these programs operate flawlessly or that they will continue to include support for TempLinc. Smarthome make no guarantees or endorsements of these products.
-
Page 6: Modes Of Operations
Modes of Operations The TempLinc can be setup in a variety of different ways depending on the project's needs. To make programming more of a simple task, decide ahead of time which mode of operation the TempLinc is to work in. There are eight operation modes that can be chosen among: Additionally, these modes can measure or report in the Fahrenheit or Celsius temperature scales. - Page 7 With the mode of operation determined, the TempLinc can now be programmed. Programming will require a PLC transmitter that can send separate unit and function codes. A Maxi-transmitter, Smarthome #4020 or X10 #SC503 or PHC02 is ideal for programming the TempLinc. All programmed settings are stored in an EEPROM and will not be lost if the power is removed or disrupted.
- Page 8 Programming (continued) Setting the Set Point in the Thermostat Mode An additional step is needed for thermostat mode, programming the temperature set point. After sending the mode command, send a house/unit code combination that corresponds to the temperature set point at which the TempLinc sends ON or OFF signals.
- Page 9 Table 2 - Temperature to PLC Code Translation Table House House House House House House Preset Dim Code + Code + Code + Code + Code + Code + Level "11" "12" "13" "14" "15" "16 100% The House code is the same as the base address house code. Temperatures are read in both Fahrenheit and Celsius.
- Page 10 Using TempLinc with Smarthome Live SmarthomeLive is a full-fea- tured monitoring and control application that lets you see inside your home, receive e- mails or text messages when motion is detected, and remotely control electronics, from anywhere in the world where you can access the Internet.
- Page 11 If you would like to suggest a product improvement or tell us about your experience with the TempLinc, we would like to hear from you. Our Engineering team monitors the feedback we receive at Smarthome. Please send your comments to: beta at smarthome dot com Please note that we will not likely be able to respond to your message.
- Page 12 Smarthome Limited Warranty Smarthome warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner's Manual.