Load Cutting Mat Into Machine; Choosing Your Characters; Basic Keys And Buttons You Should Know; Stop - Provo Craft Cricut Expression User Manual

Load Cutting Mat into Machine

TIP: Depending on the cutting mat used, allow 12" (30.48 cm) or 24" (60.96 cm) in the
back of the Cricut Expression machine for mat movement.

Choosing Your Characters

Select the character(s) you want to cut from the keypad overlay. Your selection will be
displayed in the display screen.
TIP: Letters will be cut as single characters.

Basic Keys and Buttons You Should Know

STOP

12 12 ENGLISH ENGLISH
If you want to stop the Cricut Expression™ machine from cutting
before it is finished, simply press the STOP button located adjacent
to the CUT button. This will suspend any operation in progress.
Press the CUT button to begin cutting the character selections on
the display screen. The Blade Navigation Buttons (discussed in
detail on page 15) offer eight-way directional blade movement,
moving the cutting blade to any location on the paper.
The Shift key allows you to select the character in the upper right
corner of a key. The Shift key will be backlit in green when active.
TIP: To select a character from the upper right corner of a key, press
the Shift key once (you do not need to hold it down) and make
your selection.
The Shift Lock key allows repeated selections of characters in the
upper right corners of keys. The Shift Lock key will be backlit in
green when active.
1. Once the paper has been placed on the mat,
insert the mat into the machine with the arrow
pointing toward the machine.
2. Hold the cutting mat firmly between the roller
bar and the deck and gently push the leading
edge of the mat into the rollers. Then press the
Load Paper key on the keypad overlay. The
Cricut Expression machine will then load the
mat and paper. If the mat does not load, press
the Unload Paper key and try again.
Meijer.com