Using Your Digital Box For The First Time; Changing Channels - Matsui Freeview TV receiver User Manual

Using your Digital Box for the first time

The first time you use your Matsui Digital Box, you will
see a screen like the one below. The Digital Box now
needs to scan for available Digital TV channels.
• Press [OK] on your Digital Box's remote control to begin
searching for digital channels
The search will take between 2 and 5 minutes, depending on
the digital TV service in your area.
• As channels are found, their names are listed on the TV
screen.
• When the scan has finished, the Digital Box will
automatically switch to the first channel in the list.
You can now explore and enjoy the channels
available on your Digital TV service.
If you have a Top Up TV card, please register it
before attempting to use it. Then follow the
installation instructions supplied with the card.
8
Using Standby
When you are not watching TV, you should set your Digital
Box to 'Standby'. To do this:
• Press [POWER] to switch between ON (green light) and
STANDBY (red light).
If you plan to leave your Digital Box unattended for a long
period, switch it off and unplug it at the mains supply. (Don't
worry - all of your settings will be saved.)

Changing channels

To 'hop' through the channels
^
• Press [ ^ ] or [ ] on your Digital Box remote control.
To choose a particular channel
• Press one of the buttons [0] to [9], then press [OK].
• To select 2 or 3 digit channels (10 to 999), press the
number buttons required in succession, then press [OK].
• If you do not press [OK], the Box will change to the
selected channel after approximately 1 second.