Download Print this page

Troubleshooting; Important Safety Instructions/ Warnings - Quirky SPOTTER User Manual

The multipurpose sensor

Advertisement

4 Battery life with standard use (light and
motion sensing only).
Standby time*: 2.7 years
Typical use, event detection**: 143 days
Typical use, short polling***: 80 days
Continuous polling time: 40 hours
5 Replacing batteries
You will get a notification on your app
when it's time to change to new batteries.
Remove Spotter's back cover to access
the batteries.
When inserting new AA batteries, verify
that the + and - indicators located within
the compartment are aligned with those
on the batteries.
Note: Installing batteries improperly may
result in damage to Spotter's hardware.
*Standby mode: batteries lose charge over time,
even in zero-load conditions. (Real-world standby
time will be less)
**Event Detection: calculated at
***Short Polling: calculated at
30
monitoring per day.
SPOTTER | USER MANUAL | V-O1 | PAGE 4

TROUBLESHOOTING

If a Wi-Fi® connection is unavailable,
Spotter will store the data and update the
Wink app once the network is restored.
If you do not get push notifications
on your mobile device from the Wink
app as you have specified in the
app, please check that notifications
are turned on for Wink app in your
mobile device's notification settings.
Questions? For service and support or
tutorials, email us at questions@quirky
or call 1-866-5QUIRKY.
PRECAUTIONS, CARE
AND MAINTENANCE
DO NOT submerge Spotter in water.
DO NOT wash Spotter in a dishwasher.
DO NOT expose Spotter to heat sources.
DO NOT immerse batteries in water.
DO NOT dispose of batteries in
fire as they may explode.
DO NOT attempt to disassemble, alter,
or apply heat to the batteries.
reports per day.
10
Batteries exposed to extremely high heat may
minutes of live
leak harmful liquids or ignitable materials, or
explode, causing injury and product damage.
Use the manufacturer recommended
AA batteries.
Safely dispose of batteries with your
normal household waste. We urge you
to recycle whenever possible.
Use care to avoid dropping Spotter or
subjecting it to severe impact, which
could damage the product.
Clean product with a damp soft cloth.
When replacing batteries, use a dry soft
cloth to clean the battery compartment.
IMPORTANT SAFETY
INSTRUCTIONS/ WARNINGS
CAUTION
To reduce the risk of electric shock, do not
disassemble. Only remove the cover to access
the batteries. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING
To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
To completely disconnect this product from
power, disconnect the adapter plug from
the wall outlet and remove the batteries.
The adapter plug is used to completely
disconnect the power supply to the unit and
must be within easy access to the user.
CAUTION
To reduce the risk of electric shock, do
not perform any servicing other than that
contained in the operating instructions
unless you are qualified to do so.

Advertisement

loading