Using Big Blue After Pairing; Adjusting Volume - Brookstone Big BlueT 804336 User Manual

UsIng bIg blUe afTeR PaIRIng

1 . Press the POWER/PAIRING button to turn on the Big Blue Tower until the LED
RING illuminates solid .
2 . Tap the Bluetooth touch sensitive Source Icon to put the Big Blue Tower into
Bluetooth mode .
3 . Big Blue Tower should automatically remember your device . Depending upon
your device, you may have to select "Big Blue Media Tower" in your device' s
menu .
4 . To turn Big Blue Tower off, press the POWER/PAIRING BUTTON .
Note: When Big Blue Tower is powered on, pressing any button will
activate the function leds and the led rINg for 5 seconds. After 5 seconds
has passed, the leds turn off and the led rINg remains on at a very low
brightness level.

adjUsTIng volUMe

1 . Adjust the Volume of Big Blue Tower' s sound by its touch sensitive controls .
2 . Tap the + or — icons to slowly increase/decrease the Volume, or place your
finger on the symbols continuously to increase/decrease the Volume at an
accelerated rate . The LEDs will indicate that the Volume level is adjusting .
9