Advertisement
Operation
Before using the backup sensors, become familiar
with the types of sounds in relation to the distances
between the sensors and the obstacle by parking
your vehicle in a garage or parking space. Also
confirm the obstacle detecting range of each
backup sensor.
1.
Apply the parking brake.
2.
Turn the ignition switch to ON (II), but do
not start the engine yet.
12
ON
3.
Turn the backup sensor switch ON. The
switch is located on the left rear pillar next
to the tailgate.
4.
Move the shift lever to reverse.
Confirm that the buzzer beeps for about
one second when moving the shift lever to
reverse.
This initial beep indicates the system is
working properly.
ON
BACKUP
LEFT
SENSOR
BACKUP
REAR
SWITCH
SENSOR
LINING
SWITCH
8109011B
Advertisement
