Engine Coolant - Honda Automobiles 2009 Civic Hybrid Owner's Manual

Honda 2010 civic hybrid automobile owners manual
Hide thumbs Also See for 2009 Civic Hybrid:
Table of Contents

Advertisement

If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
RADIATOR CAP
1.
Make sure the engine and radiator
are cool.
2.
Relieve any pressure in the cooling
system by turning the radiator cap
counterclockwise, without
pressing down.
3.
Remove the radiator cap by
pushing down and turning
counterclockwise.
2009 Civic Hybrid

Engine Coolant

4.
The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.
5.
Put the radiator cap back on, and
tighten it fully.
6.
Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle's
cooling system. They may not be
compatible with the coolant or
engine components.
301

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Civic hybrid 2009

Table of Contents

Save PDF