Honda Automobiles 2009 Accord Sedan Owner's Manual page 338

Main Menu
6. Turn on the lights to make sure
the new bulb is working.
7. Push the trunk lid trim back into
position.
8. Put the fastener into the hole on
the side of the trunk lining.
Reinstall the screw.
Table Of Contents
Replacing a High-mount Brake
Light Bulb
1. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
2009 Accord Sedan
BULB
SOCKET
3. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Lights
335