Download Print this page
Airpura H600 Operating & Filter Replacement Directions

Airpura H600 Operating & Filter Replacement Directions

Air purifier
Hide thumbs Also See for H600:

Advertisement

Quick Links

Airpura Limited Warranty
5 years on parts and 10 years labor
See www.airpura.com for details
To close the filter chamber
Replace the
Position the
indentation
gasket
in the cover
into the center of
the HEPA filter
Replace the
Turn the
4 screws and
Airpura
tighten
back onto
it's casters
Operating
& Filter Replacement
Directions
Thank You for choosing an
Airpura High Efficiency Air Purifier
To bring you the benefits of clean indoor air
To Begin Using Your Airpura...
Inspect the exterior of your Airpura to verify there is no
damage from shipping. If any damage is noted please
follow the instructions in the Airpura returns policy.
Wipe the unit with a damp cloth to remove any dust from
packaging
Plug the unit into a regular grounded 110 volt outlet
Turn on the unit to MAX and allow it to run for a few minutes
Set the variable speed control to the level you wish
The most efficient way to use your Airpura for regular air
quality maintenance is to run it at a low speed 24 hours a
day 7 days a week
Feel the difference breathing clean air makes
to your health
Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com
H600
Product Support Questions: Contact Airpura at 866-505-7872

Advertisement

loading
Need help?

Need help?

Do you have a question about the H600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Airpura H600

  • Page 1 To bring you the benefits of clean indoor air To Begin Using Your Airpura... Inspect the exterior of your Airpura to verify there is no damage from shipping. If any damage is noted please follow the instructions in the Airpura returns policy.
  • Page 2 Take off Remove the Remove the Turn over filter slider both hands and let the for further use the cover See over for 4 retaining gasket the Airpura canister slide to the bottom of the cavity closing the screws filter chamber...