Symbols - Homelite UT44110 Operator's Manual

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SIgNAL
DANgER:
WARNINg:
cAUTION:
cAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Electrocution
Electric Shock
Keep Bystanders Away
Operate With Two Hands
No Hands Symbol
Hot Surface
V Volts
A Amperes
Hz Hertz
W Watt
hrs Hours
Class II Construction

SyMBOLS

MEANINg
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations.
DANGER! Risk of electrocution!
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Keep all bystanders at least 50 ft. away.
Hold and operate the hedge trimmer properly with both hands.
Failure to keep your hands away from the blade will result in seri-
ous personal injury.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Voltage
Current
Frequency (cycles per second)
Power
Time
Double-insulated construction
Page 5 – English
DESIgNATION/EXPLANATION