Ddns; Dyndns.org Ddns - TP-Link TL-WR642G User Manual

1. Click the Add New button.(pop-up figure 5-43)
2. Enter the following data:
Destination IP Address - The Destination IP Address is the address of the
network or host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Gateway - This is the IP Address of the gateway device that allows for contact
between the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status pull-down list..
4. Click the Save button to save it.
Figure 5-43 Add or Modify a Static Route Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click
the Delete.
2. Modify the information.
3.
Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries

5.10 DDNS

The router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you
assign a fixed host and domain name to a dynamic Internet IP Address. It is useful when
you are hosting your own website, FTP server, or other server behind the router. Before
using this feature, you need to sign up for DDNS service providers such as
www.dyndns.org, www.oray.net
provider will give you a password or key.
To set up for DDNS, follow these instructions:

5.10.1 Dyndns.org DDNS

If your selected dynamic DNS Service Provider is www.dyndns.org, the page will
TL-WR642G 108M Wireless Router User Guide
or www.comexe.cn. The Dynamic DNS client service
- 53 -