NewStar NS-1UCABCONS15 User Manual

1u command console

Advertisement

Quick Links

1U Command Console
USER MANUAL
Model: NS-1UCABCONS15 & NS-1UCABCONS17
www.newstar.nl

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NS-1UCABCONS15 and is the answer not in the manual?

Questions and answers

Summary of Contents for NewStar NS-1UCABCONS15

  • Page 1 1U Command Console USER MANUAL Model: NS-1UCABCONS15 & NS-1UCABCONS17 www.newstar.nl...
  • Page 2: Table Of Contents

    ------------------------ Menu I. Introduction Product Description Page. 3 Package Contents Page. 3 Product Features Page. 4 Cleaning Page. 4 Precautions Page. 4 II. Control Function LCD Control Page. 5 OSD Control Page. 5 Keyboard & Mouse Page. 7 III. Inputs Diagram Inputs Page.
  • Page 3: Product Description

    NS-1UCABCONS15 and NS-1UCABCON17 1U KVM drawer, is the solution for compacting more computing power into limited space. NS-1UCABCONS15 rack mount KVM drawer has included 15” TFT LCD monitor built in 105 slim keys with Soft-Touch membrane keyboard and touch pad mouse. This LCD monitor incorporates color active matrix thin-film-transistor (TFT) Liquid crystal display to provide superior display performance.
  • Page 4: Product Features

    Product Features • High contrast color TFT LCD display support resolution up to XGA 1280X1024 • Compatible with IBM VGA, VESA, SXGA and Macintosh standards. • 105 keys slim keyboard & touch pad mouse Cleaning • Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. •...
  • Page 5: Menu

    Power and extension Cords • Do not allow anything to rest on the power cord. • Do not locate this product where persons will walk on the cord. • Use the proper power cord with correct attachment plug type. If the power source is 120V AC, •...
  • Page 6: Keyboard & Mouse

    BRIGHTNESS: Adjusts back ground black level of the screen image. CONTRAST: Adjusts for ground white level of the screen image. SHARPNESS: Adjusts the clarity and focus of the screen images. H. POSITION: Moves the screen image left or right. V. POSITION: Moves the screen up or down.
  • Page 7: Keyboard & Mouse Page

    Keyboard data output When the keyboard is ready to send data to the system, it first checks clock and data lines. If either one is in the low state, data is stored in the keyboard buffer. If both are in the high state, keyboard starts clocking data out.
  • Page 8 about the left and right “mouse” buttons. Field Size (bits) Range Meaning Amount of horizontal finger motion Amount of vertical finger motion Left 0 or 1 State of left physical button or tap/drag gesture Right 0 or 1 State of right physical button Because the Relative packet is designed to be compatible with the existing mouse protocol, the exact contents of the Relative packet vary from one protocol to another.
  • Page 9: Inputs Diagram

    DATA, are bidirectional “open-collector” signals; they are normally held at a high (+5V) level by a 5–10K pull-up resistor on the host, but either the host or the Touchpad device can pull them low at any time. When the port is idle, both signal wires are floating high. The host can inhibit the device at any time by holding CLK low.
  • Page 10: Product Specification

    ------------------------ Product Specification IV SEPC \ L LCD Display Active matrix TFT LCD panel Pixel pitch □ 15”0.297(H)x0.297(w)mm □ 17”0.264(H) x 0.264(W) mm Max. Resolution □ 15” 1024 x 768 XGA □ 17”1280 x 1024 SXGA Dimensions □ 15”436(W) x 426(D) x 44(H)mm □...
  • Page 11: Service Information

    ∗ ∗ 640*480 VESA72 37.861 72.809 ∗ ∗ 640*480 VESA75 37.500 75.000 ∗ ∗ 720*400 31.469 70.087 ∗ ∗ 800*600 SVGA 35.156 56.250 ∗ ∗ 800*600 SVGA 37.879 60.317 ∗ ∗ 800*600 VESA72 48.077 72.188 ∗ ∗ 800*600 VESA75 46.875 75.000 ∗...

This manual is also suitable for:

Ns-1ucabcons17

Table of Contents