Locking Your Watch - Fossil WRIST PDA User Manual

Us ing S e cu ri t y

Locking your watch

4.
Locking your watch
1.
2.
3.
1.
2.
3.
80 Wrist PDA User Guide
Do one of the following:
• Assign a password. Enter the password again to verify it;
then tap OK.
• Change your password. Enter a new password; then tap
OK.
• Delete your password. Enter your current password; then
tap OK. Tap Delete.
You can lock your watch with a password to protect your
information. When it is locked, a System Lockout screen displays
the name of the owner (see page 80). You must then enter your
password to continue using the watch and gain access to the
information on it.
If you forget the password, you must perform a hard reset to resume
using your watch. Performing a hard reset deletes all the records in
your watch; however, you can restore all previously synchronized
data at the next HotSync operation (see page 111).
To lock your watch with a password:
Assign a password (see page 79).
In Security, tap Lock & Turn Off.
In the System Lockout dialog box, tap Off & Lock.
Your device turns off and locks.
To unlock your watch:
Press Rocker Enter to wake up your watch.
In the System Lockout dialog box, enter your password.
Tap OK.