4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 2–3 to use the Intel
Rapid Storage Technology.
P9D-C Series RAID setting
5.
Platform Enviromental Control Interface Setting (3-pin PECI1)
When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor
information of the Platform Environmental Control Interface (PECI). Set to
pins 1-2 if ASMB7-iKVM is not installed.
4-6
®
P9D-C/4L
RAID_SEL1
1 2
2 3
3ͬͩ Party
Intel
(Default)
Chapter 4: Motherboard information
®